聚芳硫醚砜/聚苯硫醚合金的流变行为
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

863资助项目(2007AA03Z561)


Rheological Properties of Polyarylene Sulfide Sulfone/Polyphenyl Sulfide Alloys
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将聚芳硫醚砜(PASS)和聚苯硫醚(PPS)按照不同的比例通过熔融共混制备高性能合金材料。采用旋转流变仪分析了纯PASS树脂和共混物熔体的流变行为。结果表明,纯PASS树脂通过提高剪切速率和升高温度来改善熔体的流动性效果不佳;在实验范围内,随着合金中PPS含量的增加,合金的加工流动性得到明显改善,当PPS的质量分数为50%时,PASS/PPS合金的熔融加工温度最低,凝胶点降至270℃。

    Abstract:

    A series of polyarylene sulfide sulfone (PASS)/polyphenyl sulfide (PPS) alloys were prepared via melt mixing. The rheological behaviors of PASS and PASS/PPS alloys were investigated by rotational rheometer and miniature twin-screw extruder. The ynamic viscosity of PASS/PPS was characterized by the dynamic oscillatory shear and steady shear tests. The results show that the melt flowability of PASS cannot be improved efficiently by increasing share rate and temperature. The melt flowability of PASS/PPS can be improved by the addition of PPS. Simultaneously, the processing temperature is the lowest and the gel point of PASS/PPS is 270 ℃ when PPS mass fraction is 50%.

    参考文献
    相似文献
    引证文献
引用本文

王孝军,张 坤,黄光顺,龚跃武,龙盛如,杨 杰.聚芳硫醚砜/聚苯硫醚合金的流变行为[J].高分子材料科学与工程,2013,29(2):87-89. Xiaojun Wang, Kun Zhang, Guangshun Huang, Yuewu Gong, Shengru Long, Jie Yang. Rheological Properties of Polyarylene Sulfide Sulfone/Polyphenyl Sulfide Alloys[J]. Polymer Materials Science & Engineering,2013,29(2):87-89.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司