负载型金属氧化物在聚丙烯(PP)/ 氢氧化铝(ATH)阻燃体系中的协效催化阻燃作用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50973072)


Synergistic Effect of Metal Oxide Supported Catalyston Polypropylene/Aluminum Hydroxide Flame Retarded System
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为解决氢氧化铝(ATH)阻燃聚丙烯(PP)存在高添加量低阻燃效率问题,文中采取了在PP/ATH 体系中引入硼酸锌(ZnB)/负载型金属氧化物(WMS)复合协效剂的方法。研究结果表明,ZnB的引入解决了PP/ATH 阻燃材料的阴燃问题,WMS的引入显著提高了PP/ATH 体系的残炭率,降低了材料的热释放速率、总热释放量和质量损失速率,因而降低了材料的火灾危险性。而ZnB与WMS的协同使用则显著改善了材料的阻燃性能。WMS对PP/ATH 阻燃体系的协效催化阻燃作用归因于其具有促进基体树脂PP大分子链自身参与凝聚相成炭的作用。

    Abstract:

    Zinc borate (ZnB) and ZnB/metal oxide supported catalyst (WMS) composite were introduced to enhance the flame retardancy of PP/aluminum hydroxide (ATH) material, respectively. The prepared flame retarded (FR) PP composite was characterized by UL94 vertical burning test, limiting oxygen index (LOI), TGA and cone calorimeter test. The experimental results show that the addition of ZnB resolves the smoldering problem in the PP/ATH system but fails in the vertical burning test. The combination of WMS with ZnB, however, greatly enhances the flame retardancy of PP/ATH FR material from failure to UL94 V-0 level. Cone calorimeter tests show that the introduction of the WMS/ZnB composite remarkably decreases heat release rate (HRR), total heat release (THR) and mass loss rate (MLR), so the fire risk reduces. The remarkably synergistically catalytic effect of WMS represented in the flame retardant property is attributed to the promotion of WMS to the possible participation of matrix PP macromolecular chains in the condensed char formation.

    参考文献
    相似文献
    引证文献
引用本文

李平立,陈英红,陈 学,沈 磊,盛 燕.负载型金属氧化物在聚丙烯(PP)/ 氢氧化铝(ATH)阻燃体系中的协效催化阻燃作用[J].高分子材料科学与工程,2013,29(2):94-98. Pingli Li, Yinghong Chen, Xue Chen, Lei Shen, Yan Sheng. Synergistic Effect of Metal Oxide Supported Catalyston Polypropylene/Aluminum Hydroxide Flame Retarded System[J]. Polymer Materials Science & Engineering,2013,29(2):94-98.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司