聚偏氟乙烯/聚甲基丙烯酸甲酯共混物的老化性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Aging Properties of Poly(VinylideneFluoride)/Polymethylmethacrylate Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对聚偏氟乙烯(PVDF)/聚甲基丙烯酸甲酯(PMMA)共混物的老化性能进行了研究,对试样进行湿热老化和紫外老化的加速老化实验,得到了拉伸强度和色差值随老化时间的变化规律。结果表明:在湿热老化过程中,拉伸强度随时间的延长先增加后减小,且PVDF与PMMA 的质量比为70∶30时最大,但此时材料脆性太大;而在老化121d后,随PMMA含量的增加,试样的熔融指数增加;在老化152d内,四组试样色差值ΔE<1.5,属于可接受的范围。同样两组薄膜样品在紫外光老化实验中,拉伸强度先增大后减小,且在紫外老化的1040h内,色差值ΔE<1,耐紫外效果较好。

    Abstract:

    The aging performance of PVDF/PMMA composite material was investigated with accelerated hygrothermal aging test and UV accelerated aging test. The variation rule of tensile strength and color difference varying with aging time were obtained. The results show that the tensile strength increases firstly, and then decreases with the increase of aging time, which achieves to the maximum when the ratio of PVDF and PMMA is 70∶30, however, the only drawback is that the material is brittle. The melt-index increases with the content of PMMA increasing after wet and heat aging for 121 days. The color differences of four series samples are smaller than 1.5, which can be accepted. Similar phenomenons happen in ultraviolet illumination test to film samples, tensile strength increases first and then decreases, the color differences are smaller than 1 after ultraviolet aging for 1040 hours, which shows the excellent ultraviolet resistance.

    参考文献
    相似文献
    引证文献
引用本文

姚娇娇,王庭慰,周明柱.聚偏氟乙烯/聚甲基丙烯酸甲酯共混物的老化性能[J].高分子材料科学与工程,2013,29(2):99-102. Jiaojiao Yao, Tingwei Wang, Mingzhu Zhou. Aging Properties of Poly(VinylideneFluoride)/Polymethylmethacrylate Blends[J]. Polymer Materials Science & Engineering,2013,29(2):99-102.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司