CB/UHMWPE复合材料的制备及导电性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重大科学仪器设备开发专项资金(2012YQ24026411-1)


The Preparation and Electrical Properties of CB/UHMWPE Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过高速机械混磨方法制备了具有分离结构的炭黑(CB)/超高分子量聚乙烯(UHMWPE)复合材料,研究了复合材料的形态结构和导电性。结果表明,炭黑粒子可在较短的时间内涂覆在UHMWPE粒子表面。当CB的体积分数为0.6%时,复合材料的电导率提高了14个数量级,而渗流阈值仅为0.4%(体积分数,下同)。研究了热压工艺对导电复合材料电性能的影响,随热压时间的延长,复合材料的电导率出现下降趋势。

    Abstract:

    Carbon black/ultra high molecular weight polyethylene (CB/UHMWPE) composites with a segregated structure were prepared through the high-speed mechanical mixing. It is found that CB powders are well coated on the surfaces of UHMWPE particles in a very short time. The addition of 0.6% CB into UHMWPE matrix results in a dramatic increase in the electrical conductivity by 14 orders of magnitude. A lower percolation threshold is achieved with the CB volume fraction of 0.4%. The electrical conductivity of CB/UHMWPE composite decreases with the hot processing time. The proposed preparation method is simple and has potential to produce low-cost polymer conductive composites with the low percolation threshold.

    参考文献
    相似文献
    引证文献
引用本文

胡洪亮,张 国,赵竹弟. CB/UHMWPE复合材料的制备及导电性能[J].高分子材料科学与工程,2013,29(2):159-161. Hongliang Hu, Guo Zhang, Zhudi Zhao. The Preparation and Electrical Properties of CB/UHMWPE Composites[J]. Polymer Materials Science & Engineering,2013,29(2):159-161.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-09-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司