铝型材阳极电泳消光涂料的合成与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省中国科学院全面战略合作项目(2009B091300090)


Preparation and Properties of Anode Electrophoresis Extinction Coatings for Aluminum Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以丙烯酸酯和聚氨酯为原料,过硫酸钾为引发剂进行乳液聚合得到一种阴离子消光电泳涂料,研究了合成工艺、引发剂用量、反应温度对合成的影响。结果显示,采用半连续滴加法,引发剂过硫酸钾的用量为单体总量的0.6%,反应温度353K得到的乳液性能最优。通过红外光谱确认产物呈现共聚结构,透射电子显微镜结果显示,采用半连续滴加法制备的复合物呈现清晰的核壳结构,加入N,N-二甲基乙醇胺中和丙烯酸树脂上的羧基后,复合乳胶粒出现一定的微相分离。利用所得到的涂料进行电泳后涂膜光泽10(60°)以下,耐热性、耐冲击、附着力等性能达到行业标准,可应用于消光电泳涂料领域。

    Abstract:

    An acryli-polyurethane resin was prepared by an emulsion polymerization using potassium persulfate as initiator. The results show that emulsion has best properties under the condition of semi-continuous addition, 0.6% initiator potassium persulfate of the total monomer, reaction temperature of 353K. Fourier transform infrared spectroscopy (FT-IR) indicates that the polymer presents a copolymer structure. The transmission electron microscopy (TEM) images show that the composite latex particles obtained by semi continuous dropping polymerization have a clear core-shell structure. After neutralized by N,N-dimethyl ethanolamine, composite latex particles are found to show micro phase separation. The gloss of the coating on aluminum alloy by electrophoresis is below 10 (60°). The heat resistance, impact resistance and adhesion performance of the acrylic polyurethane resin reach industry standards, which can be applied to the matting field of electrophoresis.

    参考文献
    相似文献
    引证文献
引用本文

区菊花, 张 敏, 杨 永, 干建群, 哈成勇.铝型材阳极电泳消光涂料的合成与性能[J].高分子材料科学与工程,2013,29(3):5-8. Juhua Ou, Min Zhang, Yong Yang, Jianqun Gan, Chengyong Ha. Preparation and Properties of Anode Electrophoresis Extinction Coatings for Aluminum Alloy[J]. Polymer Materials Science & Engineering,2013,29(3):5-8.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司