涂料用超支化聚酯的合成及改性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Modification of Hyperbranched Polyester Used as Coatings
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以三羟甲基丙烷为核分子,2,2-二羟甲基丙酸为AB2 型单体,合成了超支化聚酯(HBP-3)。以月桂酸和苯甲酸为改性剂得到改性超支化聚酯HBP-4、HBP-5、HBP-6和HBP-7。采用红外光谱(FT-IR)、核磁共振(1H-NMR)和凝胶渗透色谱(GPC)对HBP-3的结构和分子量进行表征并测试了超支化聚酯的特性黏度,发现由三羟甲基丙烷合成了超支化聚酯的支化度在0.4~0.5之间,分子量接近理论值,分散性为1.75,特性黏度为6.35mL/g。以甲苯二异氰酸酯三聚体为固化剂,考察了改性超支化聚酯的交联涂膜性能,发现单独用月桂酸改性制成的HBP-4涂膜硬度和附着力差,用苯甲酸改性得到的HBP-5在常温下呈固态,而以月桂酸和苯甲酸混合改性时则可以得到光泽度、附着力和柔韧性优异的涂膜。

    Abstract:

    Third generation hyperbranched polyester (HBP 3) was synthesized by the pseudo-one step method using 2,2-bis(hydroxyl-ethyl) propionic acid as AB2 monomer, and trimethylolpropane as a core monomer, Then HBP-3 was modified with lauric acid and benzoic acid to get HBP-4, HBP-5,HBP-6 and HBP-7. The structure and molecular weight of HBP-3 were characterized by FT-IR, 1H-NMR and GPC. The results show that HBP-3 was successfully synthesized with the branching degree of 0.44, the intrinsic viscosity of 6.35 mL/g and the polydispersity of 1.75, and the molecular weight approaches the theoretical value. The film performances of modified HBPs cured with the toluene diisocyanate trimer were tested. It is found that HB-3 solely modified with lauric acid exhibits poor film harness and adhesion, HBP-3 modified with benzoic acid possesses great viscosity (solid state at r. t.), while HBP film modified with lauric acid and benzoic acid displays high gloss, excellent adhesion and flexibility.

    参考文献
    相似文献
    引证文献
引用本文

王 勇,孔 霞,朱延安,瞿金清.涂料用超支化聚酯的合成及改性[J].高分子材料科学与工程,2013,29(3):14-17. Yong Wang, Xia Kong, Yan’an Zhu, Jinqing Qu. Synthesis and Modification of Hyperbranched Polyester Used as Coatings[J]. Polymer Materials Science & Engineering,2013,29(3):14-17.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司