聚氨酯-氟化环氧丙烯酸酯单组分胶粘剂的合成
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synthesis and Curing of Polyurethane Modified Fluorinated Epoxy Acrylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以异佛尔酮二异氰酸酯、丙烯酸羟乙酯和甲乙酮肟为原料,合成了封闭异氰酸酯-丙烯酸酯单体。用化学滴定法和实时IR跟踪反应进度,用IR和13C-NMR表征合成单体的结构。用该单体与甲基丙烯酸缩水甘油酯、丙烯酸六氟丁酯共聚得到胶粘剂。以变温红外光谱测定解封温度为140℃,通过DSC和电子拉力机测试最优固化工艺为120 ℃/2h与140℃/2h,对PTFE表面处理后粘接强度最大为3.83MPa。

    Abstract:

    The blocked isocyanates-acrylate monomer was prepared from isophorone diisocyanate(IPDI), hydroxyethyl acrylate(HEA)and methyl ethyl ketoxime(MEKO). The experiment process was monitored by chemical titration method and real-time FT-IR. The structure of monomer was characterized by IR and13C-NMR spectrum. The adhesive was prepared by copolymerized the blocked isocyanates-acrylate monomer with glycidyl methacrylate(GMA) and hexafluoro-butyl acrylate. Different temperature IR determines that the deblocking temperature is 140 ℃. DSC curves and electronic tension test show that the adhesive curing process is 120 ℃/2h→140 ℃/2h.The results show that when the surface of polytetrafluoroethylene (PTFE) is treated, the bonding strength reaches the maximum valve of 3.83 MPa.

    参考文献
    相似文献
    引证文献
引用本文

吕洪香,周正发,安佳丽,王洁玲,徐卫兵.聚氨酯-氟化环氧丙烯酸酯单组分胶粘剂的合成[J].高分子材料科学与工程,2013,29(3):18-21. Hongxiang Lv, Zhengfa Zhou, Jiali An, Jieling Wang, Weibing Xu. Synthesis and Curing of Polyurethane Modified Fluorinated Epoxy Acrylate[J]. Polymer Materials Science & Engineering,2013,29(3):18-21.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司