功能性LDI硬段医用可降解聚氨酯的合成与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家973 计划项目(2012CB619105,2011CB606204);国家自然科学基金资助项目(51173053);国家863 计划项目(2011AA030105)


Synthesis and Properties of Degradable Medical Polyurethane with L-Lysine Ethyl Ester Diisocyanateas Hard Segment
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以聚己内酯二醇为软段、赖氨酸二异氰酸乙酯为硬段和异山梨醇为扩链剂,用二步逐步聚合法合成了医用可降解的聚氨酯。利用红外光谱(FT-IR)、核磁共振(1H-NMR)、凝胶渗透色谱(GPC)、X 射线衍射(XRD)和差示扫描量热法(DSC)对合成的聚合物进行了表征。FT-IR和1H-NMR结果表明,生成的聚合物的结构是典型聚氨酯的结构;GPC结果显示,材料的数均分子量为5.5×104,分布指数为1.64;XRD和DSC结果表明,合成的PU 具有部分结晶,在42°附近有结晶熔融峰;材料的拉伸断裂伸长率达到800%多,表现出优良的弹性。聚氨酯的酶解结果证明材料可以降解,但降解速度较慢,且降解液呈弱碱性。而PU 材料相容性实验结果表明,材料没有毒性,具有良好的生物相容性

    Abstract:

    A two-step method was used to synthesize a biodegradable polyurethane(PU) composed of L-lysine ethyl ester diisocyanate(LDI), poly (ε-caprolactone) diols and isosorbide.The results of FT-IR, 1H-NMR reveal that the products have typical PU structures. GPC results show that the molecular weight distribution of the synthesized polyurethane is narrow and unimodal with the umber average molecular weight of 54564 and a polydispersity of 1.64. The crystal structure is incomplete based on the XRD result. DSC curves display that the melting temperature is 42 ℃. Tensile mechanical tests prove that tensile strength and tensile elongation at break of PU are 6.4MPa and more than 800%, respectively, indicating that PU has good flexibility. In addition, PU can be degraded by lipase solution with slow speed and the degraded solution is weak alkalescence. The biocompatibility experiments results of PU present that PU is no or low cytotoxicity and can support live and proliferation of the ATDC5 cells.

    参考文献
    相似文献
    引证文献
引用本文

何显运,王迎军,吴 刚.功能性LDI硬段医用可降解聚氨酯的合成与性能[J].高分子材料科学与工程,2013,29(3):22-25. Xianyun He, Yingjun Wang, Gang Wu. Synthesis and Properties of Degradable Medical Polyurethane with L-Lysine Ethyl Ester Diisocyanateas Hard Segment[J]. Polymer Materials Science & Engineering,2013,29(3):22-25.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司