聚氨酯胶粘剂固化反应对其流变性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省省部产学研结合项目专项资金资助(2010B090400221)


Rheological Properties of Polyurethane Adhesivein Curing Process
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用HAAKE旋转流变仪研究了双组分聚氨酯胶粘剂的流变性质及固化过程中不同结构聚氨酯胶粘剂的凝胶时间与固化活化能,并通过差示扫描量热法(DSC)研究了样品的固化过程,分析了固化过程对胶粘剂流变性质的影响。通过Arrhenius公式推导得到聚氨酯胶粘剂的交联活化能。结果表明,预聚物的游离二苯基甲烷二异氰酸酯(MDI)含量越高、或分子量越高,聚合物的流体强度越强,固化反应速度越快,凝胶时间越短;提高固化温度可以促进交联反应的进行,缩短凝胶时间。

    Abstract:

    The rheological characteristics of two components polyurethane adhesives, gelation time and crosslinking active energy of different structures of polyurethane adhesives during curing process were studied by HAAKE rotational rheometer. The influence of curing process to adhesives was characterized by DSC. The crosslinking activation energy was obtained by the Arrhenius formula. The results indicate that when the molecular weight of prepolymer or content of free diphenylmethane diisocyanate(MDI) is higher, the entanglement degree is higher, resulting in faster curing rate and shorter gelation time. Finally, the increase of curing temperature will promote the crosslinking reaction, shorten the gelation time.

    参考文献
    相似文献
    引证文献
引用本文

孙晓微,邹 威,杜中杰,杜庆丽,李 明,张 晨.聚氨酯胶粘剂固化反应对其流变性能的影响[J].高分子材料科学与工程,2013,29(3):31-34. Xiaowei Sun, Wei Zou, Zhongjie Du, Qingli Du, Ming Li, Chen Zhang. Rheological Properties of Polyurethane Adhesivein Curing Process[J]. Polymer Materials Science & Engineering,2013,29(3):31-34.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司