不同弹性体对聚丙烯的协同增韧
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Synergistic Toughening Effect of Different Elastomers on Polypropylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以弹性体乙烯-α-辛烯共聚物(POE)、苯乙烯-乙烯/丁烯-苯乙烯共聚物(SEBS)和SEBS/POE作为增韧剂,对不同弹性体协同增韧聚丙烯进行了研究,考察了共混体系的力学性能、结晶行为、结晶形貌、动态力学分析以及低温脆断面形貌。结果表明,弹性体SEBS、POE均对PP具有增韧作用,当SEBS、POE用量分别为20%、25%时完成了“脆韧转变”,其中SEBS增韧效果较佳;SEBS、POE作为弹性体加入,使PP的结晶度降低;当SEBS/POE 复配增韧PP,且m(PP)/m(SEBS)/m(POE)=70/20/10时,具有协同增韧效应,冲击强度最高;此外,POE在PP/SEBS复配增韧中相当于相容剂,起到了“桥梁”作用。

    Abstract:

    In order to improve the low impact strength of polypropylene(PP), elastomers ethylene-α-olefin copolymer (POE), styrene-b-ethylene-co-butylene-b-styrene (SEBS), SEBS/POE were used as toughening agents. The mechanical properties, crystallization behavior, crystal morphology, dynamic mechanical analysis and low-temperature brittle fracture surface of the blends were investigated. The result show that SEBS and POE have toughening effect on PP. When mass fraction of SEBS, POE is 20% and 25%, respectively, the “brittle ductile transition” occurs, and SEBS shows the better toughening effect. The reason is that SEBS and POE, as elastomers, reduce the crystallization of PP. When the blend SEBS/POE toughens PP with the proportion of m(PP)/m(SEBS)/m(POE)=70/20/10, the impact becomes highest. The SEM results show that POE is likely the compatibilizer in PP/SEBS compound, just as the role of “bridge”.

    参考文献
    相似文献
    引证文献
引用本文

陶国良,廖小军,方建波,夏艳平,沈 清,苏中淮.不同弹性体对聚丙烯的协同增韧[J].高分子材料科学与工程,2013,29(3):55-59. Guoliang Tao, Xiaojun Liao, Jianbo Fang, Yanping Xia, Qing Shen, Zhonghuai Su. Synergistic Toughening Effect of Different Elastomers on Polypropylene[J]. Polymer Materials Science & Engineering,2013,29(3):55-59.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司