氟橡胶耐酸配方设计及基础性能表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50933004,51121001)


The Ingredients Design and Properties of Acid-Resistant Fluoroelastomer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过实验考察了硫化剂、吸酸剂、填料对耐酸氟橡胶配方性能的影响,包括硫化性能、硬度、拉伸性能和压缩永久形变,研究各组分的最佳配比。实验结果表明,氟橡胶硫化剂双酚AF用量在2.2phr~2.5phr范围内,其综合性能最好;吸酸剂对硫化胶的交联过程及不饱和键生成有明显影响,单独使用Ca(OH)2时,加入量为8phr最佳;填料硫酸钡的作用旨在提高硫化胶的耐酸性能,由于其对吸酸剂的屏蔽作用在使用时需相应提高吸酸剂用量。

    Abstract:

    The fluoroelastomer (FKM) ingredient was designed for the acid-resistant application by adjusting the components of the vulcanzing agent, acid-acceptor and the filler. The effects of the components on the properties of these ingredients were studied. The suitable ingredient of FKM 100 phr, 2,2′-bis(hydroxyphenyl) hexafluoropropane (bisphenol AF) 2.5 phr, benzyltriphenyl phosphonium chloride (BPP) 0.5 phr, Ca(OH)2 8 phr,carbon black 20 phr, wax 1 phr, BaSO4 15 phr was got. The low compression set, good tensile strength and stability were obtained. It was found that the crosslinking process was affected by the curing system and the acid acceptor. Since BaSO4 counteracted the acid acceptor in a certain extent, the amount of acid acceptor should increase accordingly with the addition of BaSO4.

    参考文献
    相似文献
    引证文献
引用本文

王忞, 吴宏,郭少云.氟橡胶耐酸配方设计及基础性能表征[J].高分子材料科学与工程,2013,29(3):60-63. Min Wang, Hong Wu, Shaoyun Guo. The Ingredients Design and Properties of Acid-Resistant Fluoroelastomer[J]. Polymer Materials Science & Engineering,2013,29(3):60-63.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司