聚丁二烯环氧改性氰酸酯的形状记忆效应
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


The Shape Memory Effect of Polybutadiene Epoxy Resin/Cyanate Ester
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选择环氧化烯烃类树脂聚丁二烯环氧树脂,以不同质量配比与双酚A型氰酸酯进行混合共聚,经适度交联固化后制备出嵌段聚合物,并对该聚合物的结构与交联程度、力学性能、动态力学性能和形状记忆性能进行了研究。结果表明,经适度交联固化的聚合物体系具有良好的形状记忆特性,随着聚丁二烯环氧树脂用量的增加,弯曲强度和储存模量降低,玻璃化温度(Tg)降低;形变恢复率均为100%,形变恢复速率随聚丁二烯环氧树脂用量的增加而增大,最大形变恢复速率为0.013s-1。

    Abstract:

    Polybutadiene epoxy resin was mixed with bisphenol A cyanate ester(BACE) with different mass ratio to form copolymers after the moderate crosslinking. The crosslinking degree, mechanical properties, dynamic mechanical properties and shape memory performance of the polymer were investigated. The results show that the moderate crosslinking curing polymer products represent good shape memory properties. The bending strength and the storage modulus of the system decrease with the increase of polysebacic polyanhydride content. The glass transition temperature(Tg) shows the similar trend. The deformation recovery rate is 100%. The deformation recovery speed increases with amount of polybutadiene epoxy resin increasing and the maximum deformation recovery speed is 0.013 s-1.

    参考文献
    相似文献
    引证文献
引用本文

王 坤,朱光明,宋 蕊,牛 磊.聚丁二烯环氧改性氰酸酯的形状记忆效应[J].高分子材料科学与工程,2013,29(3):86-88. Kun Wang, Guangming Zhu, Rui Song, Lei Niu. The Shape Memory Effect of Polybutadiene Epoxy Resin/Cyanate Ester[J]. Polymer Materials Science & Engineering,2013,29(3):86-88.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司