二苯甲烷双马来酰亚胺对硅橡胶/三元乙丙橡胶共混物硫化特性和力学性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of N,N’-4,4’-Diphenylmethane-Bismaleimide on Vulcanization and Mechanical Properties of Methyl-Vinyl Silicone Rubber/EPDM Blends
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在硅橡胶(MVQ)和三元乙丙橡胶(EPDM)及其共混物中加入交联剂二苯甲烷双马来酰亚胺(BMI),研究了BMI对MVQ、EPDM 及其共混物的硫化特性和力学性能的影响。EPDM 的硫化活性低,正硫化时间是MVQ的3倍,共混物的共硫化性和相容性不佳。BMI能降低EPDM 的活化温度,提高EPDM 的硫化速度,同时减慢MVQ的硫化速度,从而使二者的硫化速度趋于接近。在MVQ/EPDM 共混物中,BMI能使MVQ 和EPDM 在较低温度下同步反应,实现两组分的共硫化,改善MVQ与EPDM 的相容性,提高了MVQ/EPDM 共混物的力学性能。

    Abstract:

    Diphenyl-methane bismaleimide (BMI)was added to methyl-vinyl silicone rubber (MVQ), ethylene-propylene diene monomer rubber(EPDM)and their blends. The effects of BMI on the vulcanization and mechanical properties were studied. EPDM has the lower vulcanizing activity and its optimum vulcanizing time is two times longer than of MVQ. The co-vulcanization and compatibility between MVQ and EPDM are very poor. BMI can promote the vulcanization of EPDM and enhance the vulcanizing speed. Meanwhile, BMI depresses the vulcanizing speed of MVQ. Thereby, the vulcanizing speeds of MVQ and EPDM can approach closely as MBI content increases. In MVQ/ EPDM blend, BMI made parts of EPDM and MVQ to vulcanize simultaneously at about 140 ℃ and promoted the co vulcanization in the blend, consequently. The compatibility between MVQ and EPDM is improved and the mechanical properties of the blend increase.

    参考文献
    相似文献
    引证文献
引用本文

李 远,李建雄,游长江,刘安华.二苯甲烷双马来酰亚胺对硅橡胶/三元乙丙橡胶共混物硫化特性和力学性能的影响[J].高分子材料科学与工程,2013,29(3):98-102. Yuan Li, Jianxiong Li, Changjiang You, Anhua Liu. Effect of N, N’-4,4’-Diphenylmethane-Bismaleimide on Vulcanization and Mechanical Properties of Methyl-Vinyl Silicone Rubber/EPDM Blends[J]. Polymer Materials Science & Engineering,2013,29(3):98-102.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司