PLA-g-MAH 增容改性PLA/PETG 共混物的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50973074,51073110)


Structure and Properties of PLA/PETG Blends Compatibilized by PLA-g-MAH
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用熔融法制备聚乳酸接枝马来酸酐(PLA-g-MAH)用于增容改性聚乳酸/聚对苯二甲酸乙二醇酯-1,4-环己烷二甲醇酯(PLA/PETG)共混物,通过傅里叶转换红外光谱(FT-IR)、扫描电子显微镜(SEM)和力学性能测试,考察了共混物的结构和力学性能。SEM 结果显示,加入增容剂PLA-g-MAH 后,PLA/PETG 共混物两相间的界面明显变得模糊,说明PLA-g-MAH 对共混物具有一定的增容作用;增容剂的引入,使共混物的拉伸强度和弯曲模量略有下降,但冲击强度略有提高,断裂伸长率显著提高(PLA的为6.9%,而加入3%增容剂共混物的为21.9%,提高到纯样的3倍左右),表现出良好的性能。

    Abstract:

    Poly(lactic acid)-graft-maleic anhydride (PLA g MAH) prepared by melt blending was used to compatiblize poly(lactic acid)/poly(ethylene glycol-co-cyclohexane-1, 4-dimethanol terephathalate) (PLA/PETG) blend. The structure and properties of PLA/PETG blends were investigated by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM) and mechanical property testing. SEM results show that the phase interface between PLA and PETG in PLA/PETG blends with compatibilizer PLA-g-MAH becomes blurred, indicating the compatibilization effect of PLA-g-MAH for PLA/PETG blend. The introduction of PLA-g-MAH results in slight decrease of tensile strength and flexural modulus, but improvement of impact strength and elongation at break which is 6.9% for pure PLA, and 21.9% for blend with 3% content of PLA-g-MAH.

    参考文献
    相似文献
    引证文献
引用本文

蒋文柔,包睿莹,刘正英,杨 伟,谢邦互,杨鸣波. PLA-g-MAH 增容改性PLA/PETG 共混物的结构与性能[J].高分子材料科学与工程,2013,29(3):107-110. Wenrou Jiang, Ruiying Bao, Zhengying Liu, Wei Yang, Banghu Xie, Mingbo Yang. Structure and Properties of PLA/PETG Blends Compatibilized by PLA-g-MAH[J]. Polymer Materials Science & Engineering,2013,29(3):107-110.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司