魔芋葡甘聚糖/凹凸棒土复合纤维的试制及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学青年基金(51102214);先进纺织材料与制备技术教育部重点实验室(浙江理工大学)优秀青年人才培养基金(2010QN03);浙江省文物保护科技项目


Preparation and Properties of Konjac Glucomannan/Attapulgite Composite Fibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用凹凸棒土(AT)对魔芋葡甘聚糖(KGM)进行共混改性,制备了KGM/AT共混溶液,以95%的酒精为凝固浴,利用注射器模拟湿法纺丝制备了KGM/AT复合纤维,通过纤维的纵向形态结构观察初步研究了AT对KGM 溶液可纺性的影响,并对纤维的力学性能、吸水性能进行了测试。结果表明,KGM/AT 溶液具有一定的可纺性,但是在AT 用量较高时,纤维呈现出的弱节、疵点等结构不均匀性更为明显;适量的AT经过适当的牵伸有助于分子链取向,可以提高复合纤维的力学性能;此外,AT用量较低时有助于KGM 纤维吸水,最高吸水倍率提高了近50%。

    Abstract:

    Attapulgite (AT) was introduced to modify konjac glucomannan (KGM) by solution blending, and KGM/AT blend aqueous solutions were obtained. KGM/AT fibers were prepared in the 95% alcohol coagulation bath using a syringe simulated wet spinning experiment. The spinnability of blend solutions with different AT loadings was investigated according to the longitudinal morphology of KGM/AT fibers. The mechanical properties as well as water absorbing capacity were also studied. It is found that KGM/AT solutions have certain spinnability while irregular structures of KGM/AT fibers such as weak links, defects, increase with AT loadings increasing. AT nano-rods with proper amount is beneficial to the orientation of KGM molecules during the drafting progress, attribute to the improvement of the mechanical properties of KGM fibers. The water absorption of KGM fibers is improved by the addition of low AT loadings, thus the highest water absorbing capability increases by nearly 50%.

    参考文献
    相似文献
    引证文献
引用本文

彭志勤,于金超,覃岽益,胡智文.魔芋葡甘聚糖/凹凸棒土复合纤维的试制及性能[J].高分子材料科学与工程,2013,29(3):143-146. Zhiqin Peng, Jinchao Yu, Dongyi Qin, Zhiwen Hu. Preparation and Properties of Konjac Glucomannan/Attapulgite Composite Fibers[J]. Polymer Materials Science & Engineering,2013,29(3):143-146.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司