热塑性尼龙纤维烧结过程的建模及实验验证
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Coalescence Modeling and Experimental Validation of Sintering of Thermoplastic Polyamide Fibers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为了研究热塑性聚合物粉末的烧结合并过程,在Frenkel、Eshelby和Pokluda等人模型的基础上建立2D 数学模型,同时用尼龙纤维(长度远大于直径,可视为无限长)进行烧结实验,观察其横截面的合并过程。将数学模型预测结果与实验结果以及ConstrainedNaturalElementMethod(C-NEM)数值模拟结果进行对比,其结果基本一致,所获得的数学模型和实验结果可为烧结合并过程的数值模拟和理论研究提供依据。

    Abstract:

    In order to study the coalescence mechanisms of thermoplastic polymer powders, a 2D mathematical model was established based on Frenkel, Eshelby and Pokluda’s model. Sintering experiments were carried out using two polyamide fibers that can be considered as infinite cylinders as the length much larger than the diameter. 2D mathematical model was validated through comparison with results of sintering experiments as well as Constrained Natural Element Method (C-NEM) coalescence imulation. This consistence shows that the proposed coalescence model and experimental results can provide a reference for the numerical simulation of sintering process.

    参考文献
    相似文献
    引证文献
引用本文

徐 凡, 李 昕, Gilles Regnier, Denis Defauchy.热塑性尼龙纤维烧结过程的建模及实验验证[J].高分子材料科学与工程,2013,29(3):177-181. Fan Xu, Xin Li, Gilles Regnier, Denis Defauchy. Coalescence Modeling and Experimental Validation of Sintering of Thermoplastic Polyamide Fibers[J]. Polymer Materials Science & Engineering,2013,29(3):177-181.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司