聚醚醚酮基复合材料端面摩擦热的有限元数值模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(50903010,51175066);国家博士后基金(20110490114);省学术骨干教师(gg1203);省新世纪优秀人才(1251-NCET-007)资助项目


The Finite Element Simulation for Surface Frictional Heat of PEEK Matrix Composite
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    树脂基复合材料导热困难,聚热严重,所以端面摩擦热对其使用性能起到关键作用。文中根据聚醚醚酮(PEEK)复合材料在持续旋转双环摩擦运动作用下端面摩擦热产生的特点,运用有限元方法建立二维轴对称模型,研究复合材料的实时温度场分布,分析端面摩擦热对复合材料摩擦学性能的影响。最后,选取纯PEEK来验证模拟方法的可行性。研究结果表明:模拟得到的最高温度值和实测值误差小于2%,有限元方法可以比较准确地预测树脂基复合材料在连续的摩擦过程中任意时刻任意位置的温度值,可为树脂基复合材料的摩擦学应用及设计提供参考。

    Abstract:

    The friction heat play a key role in the performance of composite materials in which heat conduction is so low that heat build-up is serious during sliding process. Based on the friction heat characteristics of polyetheretherketone (PEEK) under the continuous ring rotating friction movement, the finite element method is used to establish a two dimensional axisymmetric model, studying the real-time temperature distribution, and analyzing the effect of surface friction heat on the tribological properties of the composite materials. Finally, pure PEEK was selectd to verify the feasibility of the simulation method. The results show that the maximum simulated temperature is less 2% than the measured one. The finite element method can predict accurately the temperature anytime and anywhere in the friction process, which provides reference for the tribological application and designing of resin matrix composite.

    参考文献
    相似文献
    引证文献
引用本文

汪怀远,杨淑慧,张 帅,汪桂英,朱艳吉,林 珊.聚醚醚酮基复合材料端面摩擦热的有限元数值模拟[J].高分子材料科学与工程,2013,29(3):182-185. Huanyuan Wang, Shuhui Yang, Shuai Zhang, Guiying Wang, Yanji Zhu, Shan Lin. The Finite Element Simulation for Surface Frictional Heat of PEEK Matrix Composite[J]. Polymer Materials Science & Engineering,2013,29(3):182-185.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司