溶剂型高分子分散剂的合成及在油墨中的应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21072063)


ynthesis and Application of Copolymeric Dispersant of Lauryl Methacrylate-Methyl Methacrylate-Vinyl Trimethoxy Silane
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以甲基丙烯酸月桂酯(LMA)、甲基丙烯酸甲酯(MMA)、乙烯基三甲氧基硅烷(A171)为单体,偶氮二异丁腈(AIBN)为引发剂,合成了甲基丙烯酸月桂酯-甲基丙烯酸甲酯-乙烯基三甲氧基硅烷共聚物溶剂型分散剂。探讨了单体配比、引发剂用量、反应时间、有机硅单体用量对共聚物分散剂性能的影响。结果表明,单体配比m(LMA)∶m(MMA)∶m(A171)=2∶1∶0.4,引发剂(AIBN)用量为单体总量的1%,反应时间为6h时,所制得LMA-MMA-A171三元共聚物单体转化率最高,对颗粒的分散效果最佳。制备镨黄溶剂型分散体系的最佳分散条件:分散剂用量为20%,溶剂为200# 溶剂油。该体系中,颜料颗粒的平均粒径为387.9nm。

    Abstract:

    The copolymer dispersant was synthesized using lauryl methacrylate (LMA), methyl methacrylate (MMA) and vinyl trimethoxy silane A171. The copolymers structure was characterized by FT-IR. The influences of monomer ratio of methacrylate/methyl methacrylate/vinyl trimethoxy silane, amount of initiator, polymerization time on copolymer performance were discussed. The results show that when the mass ratio of LMA, MMA and A171 is 2∶1∶0.4, 1% of the mass fraction of initiator on total monomers, and the reaction time is 6h, the copolymer has the highest conversion rate and shows an excellent dispersion efficiency. The optimal dispersion conditions are as follows: the amount of copolymer dispersant of 20%, solvent oil 200# as solvent. In this dispersion system, the average particle size of pigment is 387.9nm.

    参考文献
    相似文献
    引证文献
引用本文

林东恩,胡 凡.溶剂型高分子分散剂的合成及在油墨中的应用[J].高分子材料科学与工程,2013,29(4):5-8. Dong′en Lin, Fan Hu. ynthesis and Application of Copolymeric Dispersant of Lauryl Methacrylate-Methyl Methacrylate-Vinyl Trimethoxy Silane[J]. Polymer Materials Science & Engineering,2013,29(4):5-8.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司