超声振动对高密度聚乙烯收缩特性的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51175060);国家重点基础研究发展计划(973)项目课题(2012CB025905)


Effect of Ultrasonic Vibration on Shrinkage of HDPE
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对材料收缩率这一影响精密注塑制品尺寸精度的关键因素,以中间有两个长孔的平板型塑件为对象,设计制作了一套带有超声振动系统的精密注塑模具,在精密注塑机上进行了施加和未加超声振动的成型实验;并借助X 射线衍射分析,研究了不同超声参数作用对收缩率较大的高密度聚乙烯(HDPE)试件收缩率变化的影响关系及其微观作用机理。结果显示,与未加超声振动的试件相比,超声振动能明显降低HDPE材料的收缩率,最高降幅可达16.13%。由此表明,注塑成型过程中施加超声振动,能够有效控制制件的收缩率。

    Abstract:

    Pointed at the shrinkage, the key effect of dimensional accuracy on precision injection-molded parts, an ultrasonic vibration assisted precision injection mold for plate type plastic part with two slots was designed and fabricated, and the forming experiments with and without ultrasonic vibration were carried out on a precision injection machine. By X-ray diffraction (XRD), the influence and the mechanism of different ultrasonic field to the shrinkage of high density polyethylene (HDPE) parts with high shrinkage were studied. The experiments show that, under the same injection processing conditions, the shrinkage of HDPE decreases obviously by ultrasonic vibration, with the highest drop of 16.13%. In conclusion, the shrinkage of parts can be adjusted efficiently by ultrasonic vibration in the injection process.

    参考文献
    相似文献
    引证文献
引用本文

于同敏,祝思龙,包 成,黄晓超.超声振动对高密度聚乙烯收缩特性的影响[J].高分子材料科学与工程,2013,29(4):33-36. Tongmin Yu, Silong Zhu, Cheng Bao, Xiaochao Huang. Effect of Ultrasonic Vibration on Shrinkage of HDPE[J]. Polymer Materials Science & Engineering,2013,29(4):33-36.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司