多熔体多次注射成型聚苯乙烯/聚乙烯共混物的相形态结构演变规律
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(21174092)


Morphology of Polystyrene/Polyethylene Moldedby Multi-Melt Multi-Injection Molding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用扫描电子显微镜(SEM)对多熔体多次注射成型(MMMIM)聚苯乙烯(PS)/聚乙烯(PE)共混物制品的相形态结构进行了研究,发现MMMIM 制品呈现出特殊的“双皮-芯”结构,且不论是在MMMIM 制品的皮层材料区域还是在芯层材料区域,分散相PS的形态结构在制品的近浇口端和远浇口端均存在着显著差异,即在近浇口端处有大量取向的纤维状结构形成,而在远浇口端只有少量椭球状或棒状结构形成。在形态分析的基础上,结合MMMIM 成型原理,探讨了熔体穿透作用对多熔体多次注射成型制品形态的形成及分布的影响。

    Abstract:

    The morphology of polystyrene ( PS )/ polyethylene ( PE ) molded by multi melt multi-injection molding (MMMIM) was investigated using scanning electronic microscopy (SEM). The results show that an interesting double skin-core structure is formed in the parts molded by MMMIM. No matter in the skin layer or the core layer, there exist significant differences between the near gate ends and the far gate ends: (a) amount of fibers formed in the near gate ends, (b) few ellipsoidal and rodlike structures existing in the far gate ends. The morphology study of injection-molded PE/PS blends based on scanning electron microscope (SEM) explores the penetrating effect of the second melt on the formation and distribution of the morphology in the molded parts.

    参考文献
    相似文献
    引证文献
引用本文

吴敬敬,张 凯,张瑞岩,刘正英,杨 伟,杨鸣波.多熔体多次注射成型聚苯乙烯/聚乙烯共混物的相形态结构演变规律[J].高分子材料科学与工程,2013,29(4):65-68. Jingjing Wu, Kai Zhang, Ruiyan Zhang, Zhengying Liu, Wei Yang, Mingbo Yang. Morphology of Polystyrene/Polyethylene Moldedby Multi-Melt Multi-Injection Molding[J]. Polymer Materials Science & Engineering,2013,29(4):65-68.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司