PNIPA 纳米凝胶的性能表征与分子力学模拟
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

河南省科技攻关项目(102101210100)


Characterization and Molecular Mechanics Simulation of Poly(N-Isopropyl Acrylamide) Nanogels
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以N-异丙基丙烯酰胺(NIPA)为聚合单体,分别采用连续和间歇方式无皂乳液聚合法制备了单分散性良好且粒径可精确控制的PNIPA纳米凝胶。用原子力显微镜(AFM)和透射电镜(TEM)等方法对纳米凝胶的结构、形貌和粒径及其分布进行了表征,用分子力学模拟法研究了纳米凝胶的分子链发生体积相转变前后分子构象的变化。结果表明,PNIPA纳米凝胶的粒径随交联剂和乳化剂含量的增加而逐渐减小,连续式制备的PNIPA 纳米凝胶比间歇式纳米凝胶的平均粒径小,PNIPA纳米凝胶的较低临界溶解温度(LCST)在32℃左右,PNIPA纳米凝胶分子链在LCST以上严重卷曲,在纳米凝胶分子链中存在很强的非键作用力。

    Abstract:

    Poly (N-isopropyl acrylamide)(PNIPA) nanogels with good monodispersity and precise particle size were prepared by continuous and intermittent free emulsion polymerization method with N-isopropyl acrylamide (NIPA) as the monomer. The structure, morphology, particle size and size distribution of nanogels were characterized by AFM, TEM etc. Molecular conformation changes in the process of volume phase transition of nanogels were studied by molecular mechanics simulation. The results show that the particle size of PNIPA nanogels decreases with the content of crosslinking agent and emulsifier increasing. The average particle size of PNIPA nanogels synthesized by continuous method is larger than that by intermittent method. The lower critical solution temperature (LCST) of PNIPA nanogels is about 32 ℃. Molecular chains of PNIPA nanogels become curling seriously above LCST. There is much non-bonding interaction in molecular chains of PNIPA nanogels.

    参考文献
    相似文献
    引证文献
引用本文

李智慧,刘志景,段翔远,高旭静,刘文涛,何素芹,朱诚身. PNIPA 纳米凝胶的性能表征与分子力学模拟[J].高分子材料科学与工程,2013,29(4):69-73. Zhihui Li, Zhijing Liu, Xiangyuan Duan, Xujing Gao, Wentao Liu, Suqin He, Chengshen Zhu. Characterization and Molecular Mechanics Simulation of Poly(N-Isopropyl Acrylamide) Nanogels[J]. Polymer Materials Science & Engineering,2013,29(4):69-73.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司