固化剂对炭黑/环氧树脂导电复合材料阻温特性的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Influences of Curing Agent on Resistance-Temperature Characteristics of Carbon Black/Epoxy Resin Conductive Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    分别以2-乙基-4-甲基咪唑(2,4-EMI)和甲基四氢邻苯二甲酸酐(MeTHPA)为固化剂,低结构炭黑(F101CB)为导电填料,环氧树脂(E-54)为基体,采用超声分散溶液混合法制备了F101/E-54/2,4-EMI和F101/E-54/MeTHPA复合材料。通过电阻-温度特性测试和差示扫描量热(DSC)法分别对其电性能和玻璃化温度进行了表征与分析。结果表明,以2,4-EMI和MeTHPA为固化剂的F101/E-54复合材料都具有PTC效应,F101/E-54/2,4-EMI复合材料具有较大的室温电阻率和PTC转变温度,较小的PTC强度;101/E-54/2,4-EMI复合材料的玻璃化温度Tg 为161.7 ℃,与其PTC转变温度160.4℃接近,F101/E-54/MeTHPA复合材料的玻璃化温度Tg 为133.5℃,与其PTC转变温度134.1 ℃接近;多次热循环使F101/E-54复合材料的PTC稳定性得到改善,以2,4-EMI为固化剂的复合材料体系表现得尤为明显。

    Abstract:

    Using 2-ethyl-4-methylimidazole(2,4-EMI) or methyl-tetrahydrophalic anhydride methpa(MeTHPA) as curing agent, low structure carbon black(F101CB) as conductive filler, epoxy resin E-54 (EP)as matrix, F101/E-54/2,4-EMI and F101/E-54/MeTHPA composites were prepared by ultrasonic dispersion and solution blending. Its electric properties and glass transition temperature(Tg) were analyzed by resistance-temperature characteristic test and differential scanning calorimetry(DSC). The results show that F101/E-54/2,4-EMI and F101/E-54 /MeTHPA composites have positive temperature coefficient (PTC) effect, but using 2,4-EMI as curing agent can endow the composites with higher volume resistivity under room temperature and PTC transition temperature, and lower PTC intensity. PTC transition temperature(160.4 ℃) of F101/E-54/2,4-EMI composite closes to its Tg(161.7 ℃), PTC transition temperature(134.1 ℃) of F101/E-54/MeTHPA composite closes to its Tg(133.5 ℃). Thermal cycling can improve PTC stability of F101/E-54 composites, especially for the composite using 2,4-EMI as curing agent.

    参考文献
    相似文献
    引证文献
引用本文

唐 婷,季铁正,杜 彦,郑星卓.固化剂对炭黑/环氧树脂导电复合材料阻温特性的影响[J].高分子材料科学与工程,2013,29(4):79-81. Ting Tang, Tiezheng Ji, Yan Du, Xingzhuo Zheng. Influences of Curing Agent on Resistance-Temperature Characteristics of Carbon Black/Epoxy Resin Conductive Composites[J]. Polymer Materials Science & Engineering,2013,29(4):79-81.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司