剑麻纤维素微晶/酚醛树脂复合材料的力学性能和摩擦性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163003,21264005);广西自然科学基金资助项目(2010GXNSFA013030,2012GXNSFBA053153,2012GXNSFBA053155)


Mechanical and Friction Properties of SFCM/PF Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用3-氨基丙基三乙氧基硅烷(KH550)对自行制备的剑麻纤维素微晶(SFCM)进行表面改性,采用双螺杆挤出机对SFCM 与酚醛树脂(PF)进行熔融共混,采用模压成型方法制备SFCM/PF复合材料。研究不同SFCM 含量的SFCM/PF复合材料的力学、摩擦学性能,并采用扫描电镜(SEM)观察磨损面的形貌。结果表明,SFCM 的加入能有效提高复合材料的力学性能和摩擦性能,当SFCM 含量为6%时,复合材料的冲击强度提高了55.56%,SFCM 含量为4%时,复合材料的弯曲强度提高了31.37%;SEM 观察发现,改性后的SFCM 为微纤维形态,径向尺寸为10μm;热重分析表明,改性SFCM 初始分解温度比剑麻纤维提高了60℃。

    Abstract:

    Cellulose microcrystal extracted from sisal fiber (SFCM) was modified by silane coupling agent KH550. The SFCM/phenolic formaldehyde (PF) composites with different contents of SFCM were prepared by blending technology and molding method. Effects of the SFCM contents on the mechanical properties, hardness, and friction properties of the composites were studied. The impact strength and the flexural strength of the composites are increased by 55.56% and 31.37% respectively, and the friction properties of the composites are improved obviously by adding SFCM. SEM results show that the morphology of modified SFCM is in micro-fiber, and the initial decomposition temperature of modified SFCM increases by 60 ℃ over that of sisal fiber.

    参考文献
    相似文献
    引证文献
引用本文

黄绍军,韦 春,刘红霞,吕 建,余传柏.剑麻纤维素微晶/酚醛树脂复合材料的力学性能和摩擦性能[J].高分子材料科学与工程,2013,29(4):97-100. Shaojun Huang, Chun Wei, Hongxia Liu, Jian Lv, Chuanbai Yu. Mechanical and Friction Properties of SFCM/PF Composites[J]. Polymer Materials Science & Engineering,2013,29(4):97-100.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司