系列有机硅改性紫外光-热混杂固化树脂的表面性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Surface Properties of Series of UV-Heat Curable Organo silicon Modified Epoxy Monoacrylates
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以有机硅改性丙烯酸环氧单酯为树脂配制了一系列紫外光-热混杂固化体系,用红外光谱(FT-IR)表征了固化过程特征吸收峰的变化;测试了有机硅链段的长短对固化膜表面水接触角、表面能和硅元素分布的影响。结果表明,在相同稀释剂条件下,丙烯酸环氧单酯光-热固化膜的表面水接触角为62.53°,表面能为47.62mN/m,有机硅改性丙烯酸环氧单酯体系光-热固化膜的表面水接触角最高可达106.75°,相应的表面能为18.62mN/m。有机硅改性体系中随着有机硅链段的增长,固化膜表面水接触角和表面硅元素含量逐渐增加,表面能则逐渐下降,表面元素分析也显示固化膜表面硅元素含量要比背面的高。

    Abstract:

    A series of UV-heat hybrid curable compositions were prepared using organosilicon modified epoxy monoacrylates (OMEMA) as resins. The change of absorption peaks of double bond and epoxy group were identified by FT-IR spectra during UV-heat curing process. The influence of the length of organosilicon segment on water contact angle, surface tension and surface elements distribution of UV-heat cured films were investigated. With the same content of active diluents, the water contact angle and surface tension of the UV-heat cured films of the epoxy monoacrylates (EMA) compositions are 62.53° and 47.62 mN/m respectively, but the maximum water contact angle of the UV-heat cured films of organosilicon modified epoxy monoacrylates compositions is 106.75° and its surface tension is 18.62 mN/m. With increase of the length of organosilicon segment in OMEMA systems, the contact angle and surface Si content of the UV-heat cured films increase, but its surface tension decreases. The analysis of surface elements shows that Si content in the air side of UV-heat cured films is higher than that in the glass side.

    参考文献
    相似文献
    引证文献
引用本文

刘红波,林 峰,肖望东,张武英,徐 玲.系列有机硅改性紫外光-热混杂固化树脂的表面性能[J].高分子材料科学与工程,2013,29(4):101-103. Hongbo Liu, Feng Lin, Wangdong Xiao, Wuying Zhang, Ling Xu. Surface Properties of Series of UV-Heat Curable Organo silicon Modified Epoxy Monoacrylates[J]. Polymer Materials Science & Engineering,2013,29(4):101-103.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司