以流变数据预测粘弹性颗粒驱油剂在多孔介质中运移时的平衡压力
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技重大专项(2011ZX05011-044-002HZ)


Predicting the Equilibrium Pressure of the Viscoelastic Particles Displacing Agent Transporting in Porous Mediaby Rheological Data
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于如何不通过复杂的渗流实验粗略预测部分交联聚丙烯酰胺(PCPAM)的驱油性能,结合系统的流变试验和渗流实验的数据分析,发现聚合物溶液在流经填沙管时,填沙管的压差大小与聚合物溶液初始模量有关。文中通过Maxwell模型推导了平衡压力和流变性能的关系,再经过拟合得到PCPAM 在多孔介质中的渗流模型。由此证明,可以由流变仪的平板模式在一定板间距下PCPAM 样品的弹性模量G′等流变量据来衡量和预测聚合物溶液在多孔介质内的流动行为,进而有效评估新型驱油剂的驱油效果。

    Abstract:

    Focused on how to give a rough evaluation of the oil displacement performance of the partially crosslinked polyacrylamide (PCPAM) without the complex laboratory evaluation experiment, through the combination of the rheological tests and seepage experiment data analysis, it is found that pressure difference across the model is concerned with the polymer solution initial modulus when the solution flows through the filling model. The relationship between the steady-state pressure difference and rheological property by Maxwell model was proved. After the curve fitting, the percolation model of PCPAM in porous media was obtained. So rheological data such as the elastic modulus G′ at certain plate spacing can be used to measure and predict the behavior of polymer solution in porous media theoretically, also can predict the oil displacement performance of PCPAM effectively.

    参考文献
    相似文献
    引证文献
引用本文

张 凯,姜祖明,李 利,朱 丽,苏智青,黄光速,郑 静.以流变数据预测粘弹性颗粒驱油剂在多孔介质中运移时的平衡压力[J].高分子材料科学与工程,2013,29(4):104-108. Kai Zhang, Zuming Jiang, Li Li, Li Zhu, Zhiqing Su, Guangsu Huang, Jing Zheng. Predicting the Equilibrium Pressure of the Viscoelastic Particles Displacing Agent Transporting in Porous Mediaby Rheological Data[J]. Polymer Materials Science & Engineering,2013,29(4):104-108.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司