微注塑薄壁制品可成型性及充填过程中的流动现象分析
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

973计划前期研究专项(2012CB626809);2010年河南省重大公益项目(HNZB[2010]N91)


Analysis of Molding Ability of the Micro Thin Wall Parts and Some Flow Phenomenain Filling Stage of Micro Injection Molding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    基于一组薄壁微制品的微注塑成型实验,研究不同尺度(100μm、200μm、500μm、1mm)制品的可成型性及充填过程中的流动现象,获得注塑速度、模具温度和熔体温度对不同厚度制品充填性能的影响,并对成型过程中出现的流动不平衡现象及前沿面形状变化的机理进行了分析。结果表明,型腔充填率随着注塑速度、模具温度、熔体温度的升高而增大,且随着型腔厚度减小,制品实现完整充填越来越困难,工艺操作窗口变窄且注塑速度和模具温度都维持在高水平状态。

    Abstract:

    Based on the micro-injection molding experiments of a set of micro thin wall parts, the molding ability and flow phenomena in the filling process of the parts of different scale (100 μm, 200 μm, 500 μm, 1mm) were investigated, and the influences of injection speed, mold temperature and melt temperature on the molding ability of the parts with different thicknesses were obtained. The mechanism of flow imbalance phenomena and the variation of the shape of melt flow front in molding process were analyzed. The results show that the cavity filling ratio increases as the injection speed, mold temperature and melt temperature increase. Filling of the cavity becomes more difficult with the cavity thickness decreasing, and the process operating window becomes narrower. The injection speed and the mold temperature are maintained at a high level.

    参考文献
    相似文献
    引证文献
引用本文

李 爽,王利霞,李 倩,张勤星,申长雨.微注塑薄壁制品可成型性及充填过程中的流动现象分析[J].高分子材料科学与工程,2013,29(4):109-112. Shuang Li, Lixia Wang, Qian Li, Qinxing Zhang, Changyu Shen. Analysis of Molding Ability of the Micro Thin Wall Parts and Some Flow Phenomenain Filling Stage of Micro Injection Molding[J]. Polymer Materials Science & Engineering,2013,29(4):109-112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司