CeO2-ZrO2-聚苯乙烯杂化材料的制备与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Performance of CeO2-ZrO2-Polystyrene Hybrid Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以非离子表面活性剂P123为模板剂,ZrOCl2·8H2O 和Ce(NO3)3 ·6H2O 为原料,制备出CeO2-ZrO2 介孔粒子。采用油酸对介孔CeO2-ZrO2 粒子进行有机改性后,与苯乙烯原位聚合得到CeO2-ZrO2-聚苯乙烯杂化材料。该杂化材料的热分解温度达到417℃,与纯的聚苯乙烯分解温度相比有显著提高;当CeO2-ZrO2 用量达到m(CeO2-ZrO2)/m(苯乙烯)=2/100时,杂化材料的拉伸强度达到最大值42.3MPa;当CeO2-ZrO2 用量达到m(CeO2-ZrO2)/m(苯乙烯)=3/100时,杂化材料的缺口冲击强度达到最大值3.18kJ/m2;有机分子进入CeO2-ZrO2 介孔材料孔道内的方式和表面包覆作用,促进了无机粒子与基体间形成强有力的界面粘合,极大改善了聚苯乙烯的力学性能和热性能。

    Abstract:

    CeO2-ZrO2 mesoporous material was prepared by calcinations using block copolymers P123 as templates, zirconium chloride octahydrate (ZrOCl2·8H2O) and cerium nitrate hexahydrate (Ce(NO3)3·6H2O) as raw materials. CeO2-ZrO2-polystyrene hybrid materials were prepared by in situ polymerization of styrene and CeO2-ZrO2 mesoporous particles modified by oleic acid. The thermal decomposition temperature of hybrid materials reaches 417 ℃, higher than that of pure polystyrene. When the content of CeO2-ZrO2 is 2%, the tensile strength of hybrid materials reaches a maximum of 42.3MPa. And when the content of CeO2-ZrO2 is 3%, the impact strength of materials reaches a maximum of 3.18 kJ/m2. The organic molecules coated the surface and filled in the pore canal of CeO2-ZrO2 mesoporous particles, enhancing the interface cohesive force between CeO2-ZrO2 particles and polystyrene matrix, and greatly improving the mechanical property and heat resistance performance of polystyrene.

    参考文献
    相似文献
    引证文献
引用本文

邰晓曦,孙 婧,程 江,文秀芳,杨卓如. CeO2-ZrO2-聚苯乙烯杂化材料的制备与性能[J].高分子材料科学与工程,2013,29(4):141-144. Xiaoxi Tai, Jing Sun, Jiang Cheng, Xiufang Wen, Zhuoru Yang. Preparation and Performance of CeO2-ZrO2-Polystyrene Hybrid Material[J]. Polymer Materials Science & Engineering,2013,29(4):141-144.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司