碳纳米管/三嵌段聚合物(PPP)无溶剂流体的制备及对聚丙烯性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51073129);中科院北京分子科学国家实验室开放课题资助


Synthesis of Non-Ionic Solvent-Free MWNTs Nanofluids and Their Effect on Properties of Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用三嵌段聚合物(PPP)对酸化碳纳米管(MWNTs-COOH)进行改性,制备MWNTs-COOH/PPP无溶剂流体。采用流变仪研究其流变性能,采用差热扫描(DSC)研究不同制备方法对MWNTs-COOH/PPP/聚丙烯复合材料性能的影响。结果表明,无溶剂存在时,MWNTs-COOH/PPP复合物具有液体的特征,碳纳米管含量为27.37%。以MWNTs-COOH/PPP复合物作为增强材料,采用溶液法和机械法制备聚丙烯纳米复合材料,碳纳米管可以使聚丙烯的结晶度有一定程度提高。

    Abstract:

    Non-ionic solvent-free carbon nanotube nanofluids(NSCNN) were prepared using carboxylic MWNTs -COOH and poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO-b-PPO-b-PEO) via hydrogen bonding between the surface -OH or C=O groups and the hydroxy groups. It can be seen that NSCNN were used as reinforcing materials for PP to prepare nanocomposites through solution and mechanical method. Rotary rheometer was used to test the flow feature of the NSCNN. Copolymer is attached on the surface of MWNTs. The MWNTs content is 27.37%. Storage modulus G′ is smaller than the loss modulus G″, indicating the NSCNN is liquid. MWNTs can enhance the crystalline degree of PP.

    参考文献
    相似文献
    引证文献
引用本文

张 曦,郑亚萍,兰 岚,李化毅,杨海成.碳纳米管/三嵌段聚合物(PPP)无溶剂流体的制备及对聚丙烯性能的影响[J].高分子材料科学与工程,2013,29(4):155-159. Xi Zhang, Yaping Zheng, Lan Lan, Huayi Li, Haicheng Yang. Synthesis of Non-Ionic Solvent-Free MWNTs Nanofluids and Their Effect on Properties of Composites[J]. Polymer Materials Science & Engineering,2013,29(4):155-159.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司