双酚芴/双酚A 型共聚芳酯的合成和性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江西省教育厅科技项目(GJJ12193);航空科学基金(2011ZF56026);国家自然科学基金资助项目(51003044);北京分子科学国家实验室开放课题基金;2012年度国家人力资源和社会保障部归国留学生科技活动择优资助项目


Synthesis and Properties of Bisphenol Fluorene/Bisphenol Copolyarylate
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以间、对苯二甲酰氯(IPC)、(TPC)、双酚芴(BHPF)和双酚A(BPA)为单体,采用相转移催化界面缩聚法合成了双酚芴型共聚芳酯(PAR-F/A)。结果表明,该系列共聚芳酯的玻璃化转变温度(Tg)和塑化温度(Ts)随双酚芴结构单元比例的增加而提高,当BHPF与BPA物质的量比为15~30比85~70时,Tg 为209.5 ℃~228.3 ℃,Ts 为282 ℃~298℃;热失重5%的温度(Td)达394℃~415℃。PAR-F/A为无定型聚集态,能溶解于常见的卤代烃和强极性非质子有机溶剂,采用流延法可制备成坚韧透明的薄膜,其拉伸强度达58MPa~69 MPa,断裂伸长率为10.8%~12.2%,弹性模量为1.1GPa。共聚物具有优良的耐热性能和力学性能。

    Abstract:

    Bisphenol fluorene/ bisphenol A copolyarylate were synthesized by interfacial polycondensation using terephthaloyl chloride (TPC), isophthaloyl chloride (IPC), bisphenolA (BPA) and 9,9-bis-(4-hydroxypheny1) fluorene(BHPF) as monomers. The copolymer shows excellent thermal properties. When the molar ratio of BHPF and BPA is 15~30 to 85~70, the glass transition temperature(Tg) of the copolymers is in the range of 209.5 ℃ to 228.3 ℃ and melting plasticizing temperature (Ts) is between 282 ℃ to 298 ℃. The copolymer also has high thermal stability, 5% decomposition temperature is between 394 ℃ to 415 ℃ in nitrogen and increases with the molar ratio of bisphenol fluorene increasing. This series of PAR-F/A with amorphous state can be dissolved in common halogenated hydrocarbons and polar aprotic organic solvents. By casting method. tough and transparent film can be got. The tensile strength of film is 58MPa~69MPa, Young’s module is 1.1GPa, the longation at break is 10.8%~12.2%.

    参考文献
    相似文献
    引证文献
引用本文

黄桂贤,谢明隆,宋 琤,宋才生,杨士勇.双酚芴/双酚A 型共聚芳酯的合成和性能[J].高分子材料科学与工程,2013,29(5):33-36. Guixian Huang, Minglong Xie, Cheng Song, Caisheng Song, Shiyong Yang. Synthesis and Properties of Bisphenol Fluorene/Bisphenol Copolyarylate[J]. Polymer Materials Science & Engineering,2013,29(5):33-36.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司