不同峰形高密度聚乙烯的结构与性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中国石油科技创新基金项目(2009D-5006-05-04)


Structure and Properties of HDPE with Different Molecular Weight Distribution
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用高温凝胶色谱法研究了不同分子量分布的高密度聚乙烯(HDPE),并对各自的流变性能、热性能和力学性能进行了研究。结果表明,分子量及其分布是决定树脂性能的主要因素,低分子量部分含量越多,结晶度越大。熔体流动速率(MFR)与重均分子量(Mw)成反比,重均分子量越大,对剪切速率越敏感。分子量分布指数(PI)越大,拉伸强度越高,但冲击性能下降。

    Abstract:

    Different molecular weight distributions (MWD) of high density polyethylene (HDPE) were characterized by high temperature gel permeation chromatography (HT-GPC). Their respective rheological, thermal and mechanical properties were investigated. The results show that molecular weight and its distribution are the major factors to affect resin performance. Crystallinity rises with the increase of low molecular weight (LMW) component content. Melt flow rate (MFR) is found to be inversely proportional to the weight average molecular weight (Mw). HDPE with the larger Mw is sensitive to the shear rate. The polydispersity index (PI) increases with the increase of LMW component amount for bimodal HDPE, which has a positive effect on tensile strength and a negative effect on the impact property.

    参考文献
    相似文献
    引证文献
引用本文

石行波,王菊琳,蔡小平,刘宏吉.不同峰形高密度聚乙烯的结构与性能[J].高分子材料科学与工程,2013,29(5):37-40. Xingbo Shi, Julin Wang, Xiaoping Cai, Hongji Liu. Structure and Properties of HDPE with Different Molecular Weight Distribution[J]. Polymer Materials Science & Engineering,2013,29(5):37-40.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司