微注塑聚丙烯制品的形态结构
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

973计划前期研究专项(2012CB626809); 2010年河南省重大公益项目(HNZB[2010]N91)


Morphology of Micro Injection Molded Polypropylene Parts
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    微注塑成型中,聚合物熔体在型腔中的流动形态与传统注塑中有很大的不同,研究成型工艺条件对微注塑制品形态结构的影响对控制微制品形态结构、提高微制品性能具有重要的意义。文中以等规聚丙烯(iPP)为原料,采用单因素实验,研究注塑成型中熔体温度和注射速度两个主要工艺参数对1mm 和200μm 厚微制品形态结构的影响及微制品中的一些特殊的形态结构现象。实验结果表明,1mm 厚微制品的形态分布呈典型皮芯结构,而200μm 厚微制品观察不到有非晶冷冻层和球晶结构,全部是具有明显shish-kebab结构的剪切层。

    Abstract:

    The flow characteristic in micro injection molding is different from that in traditional injection molding, and the morphology of the parts was affected by the thermal history and shear history in the molding process. It is significant to investigate the influences of the processing conditions on the morphology of the parts to control the morphology and improve the properties of the parts. Isotactic polypropylene (iPP) was chosen for the experiments, and the single factor experiments were conducted to investigate the influences of the two main process parameters(melt temperature and injection speed) on the morphology as well as some special morphology phenomena of the parts with the thickness of 1mm and 0.2mm. The results ndicate that the parts with thickness of 1mm show a typical skin-core structure, while the parts with thickness of 0.2mm represent the core-free structure with shish-kebab structure in the whole thickness.

    参考文献
    相似文献
    引证文献
引用本文

李 爽,王利霞,李 倩,郑谏齐,王心超,秦智慧,申长雨.微注塑聚丙烯制品的形态结构[J].高分子材料科学与工程,2013,29(5):74-78. Shuang Li, Lixia Wang, Qian Li, Jianqi Zheng, Xinchao Wang, Zhihui Qin, Changyu Shen. Morphology of Micro Injection Molded Polypropylene Parts[J]. Polymer Materials Science & Engineering,2013,29(5):74-78.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司