硼酚醛树脂的热降解过程
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Thermal Degradation o fBoron Modified Phenolic Resins
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用热重分析法和热重-质谱联用技术考察了氨酚醛树脂和硼改性酚醛树脂的热降解过程,利用红外光谱和固体核磁共振技术研究了热降解过程中两种树脂结构的变化规律,以期为合成成炭率高、热稳定性好的硼改性酚醛树脂提供依据。结果表明,在酚醛树脂中引入硼酸后改变了其分子结构,生成了键能较高的硼酯键,提高了酚醛树脂的成炭率和热稳定性,700℃硼酸改性酚醛树脂的成炭率为76.2%,高于未改性氨酚醛树脂的成炭率66.9%。

    Abstract:

    The ammonia catalyzed resin (PF1.2) and resin modified by boric acid (BPF) were studied by thermo-gravimetric analysis and thermo gravimetric-mass spectrometry (TG MS) analysis. Their structural changes during thermal degradation were investigated by means of Fourier-transform infrared (FT-IR) and solid-state 13C nuclear magnetic resonance (13C-NMR). The results show that the molecular structure of resin alters and the B-O bond with high bond energy is formed after modification by boric acid, thus the char yield of phenolic resin is improved. A higher char yield of 76.2% which is higher than that of ammonia catalyzed resin (66.9%) is attached at 700 ℃ in nitrogen atmosphere.

    参考文献
    相似文献
    引证文献
引用本文

陈智琴,陈鸯飞,李文魁,刘洪波.硼酚醛树脂的热降解过程[J].高分子材料科学与工程,2013,29(5):96-99. Zhiqin Chen, Yangfei Chen, Wenkui Li, Hongbo Liu. Thermal Degradation o fBoron Modified Phenolic Resins[J]. Polymer Materials Science & Engineering,2013,29(5):96-99.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司