多次压缩载荷下聚丙烯挤出发泡材料的吸能特性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31270610);湖北省自然科学基金资助项目(2009CDB136)


Energy Absorption Properties of Polypropylene Extrusion Foam Materials Under Multiple Compressive Loading
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以化学交联法制备的改性聚丙烯(PP)为基体材料,偶氮二甲酰胺(AC)为发泡剂,采用挤出法制备了PP发泡材料,研究了循环压缩、残余应变对发泡材料吸能特性的影响。结果表明,材料的能量吸收能力及吸能效率均随循环压缩次数增加而下降;定应变循环压缩模式下,能量吸收能力及吸能效率随泡沫密度的下降而下降,变应变模式时材料密度对能量吸收能力及吸能效率没有明显的影响规律。此外,材料的吸能特性随残余应变值的增加而下降。

    Abstract:

    Polypropylene (PP) foams were obtained using extrusion foaming process, then PP as matrix materials was modified using azodicarbonamide (AC) as the foaming agent by chemical cross linking method. Influences of cyclic compression and residual strain on foam materials energy absorption characteristics were investigated. The results show that the ability of the foam energy absorption and the absorption efficiency decrease with the increase of cyclic times. In the stable strain cyclic compression mode, energy absorption ability and the absorption efficiency decrease with the decrease of foam density, while the variation of strain cyclic compression mode have no apparent effect on the energy absorption ability and absorption efficiency. The material energy absorption properties reduce with the increase of residual strain.

    参考文献
    相似文献
    引证文献
引用本文

胡圣飞,朱贤兵,胡 伟,蔡 畅,晏 翎.多次压缩载荷下聚丙烯挤出发泡材料的吸能特性[J].高分子材料科学与工程,2013,29(5):104-108. Shengfei Hu, Xianbing Zhu, Wei Hu, Chang Cai, Ling Yan. Energy Absorption Properties of Polypropylene Extrusion Foam Materials Under Multiple Compressive Loading[J]. Polymer Materials Science & Engineering,2013,29(5):104-108.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司