聚丙烯流延基膜的硬弹性结构及拉伸成孔性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省太阳能电池材料与技术重点实验室资助项目


Structure of Hard Elastic Polypropylene Cast Films and Its Influence on the Microporous Membrane Formation
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在不同流延条件下制备聚丙烯(PP)流延基膜,并对基膜施加拉伸使其形成微孔,通过差示扫描量热测试和傅立叶变换红外光谱表征基膜的结晶度、片晶厚度和晶区的取向程度等硬弹性结构参数,使用扫描电镜观察微孔膜的孔形态并测定了微孔膜的透气率,研究了流延工艺条件与基膜的硬弹性结构及拉伸成孔性之间的关系。结果表明,流延辊温度主要影响基膜结晶度和片晶厚度,牵伸比主要影响晶区取向程度。基膜硬弹性结构越完善,弹性回复率越大,拉伸后形成的微孔数量越多,孔形态和孔结构更加均匀,透气率增大。

    Abstract:

    The hard elastic polypropylene (PP) cast films were prepared under different casting conditions and the relations between hard elastic structure and micropore formation were investigated. The crystallinity, lamellar thickness and lamellar crystalline orientation of PP cast films were characterized by DSC and FT-IR. Microporous structure was evaluated via SEM and Gurley value. It is found that cast roll temperature mainly affects the crystallinity and lamellar thickness, while the draw ratio primarily influences the lamellar crystalline orientation. The PP films having more perfect crystallite structures have the higher elastic recovery(ER) value. And PP cast films with higher elastic recovery values show better micropore-forming performance after uniaxial stretching. The resulting PP microporous membranes have increased number of micropores, uniformly distributed microporous structure, and higher air permeability.

    参考文献
    相似文献
    引证文献
引用本文

谢 洵,杨兴成,杨 茜,邱园鑫,丁永红,俞 强.聚丙烯流延基膜的硬弹性结构及拉伸成孔性[J].高分子材料科学与工程,2013,29(5):109-112. Xun Xie, Xingcheng Yang, Xi Yang, Yuanxin Qiu, Yonghong Ding, Qiang Yu. Structure of Hard Elastic Polypropylene Cast Films and Its Influence on the Microporous Membrane Formation[J]. Polymer Materials Science & Engineering,2013,29(5):109-112.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司