预处理和反应溶剂对纤维素基高吸水树脂吸水率的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51174144);山西省科学技术发展计划项目(201103210392)


The Effects of Pretreatment of Cellulose and Different Solvents on the Water Absorbency of the Cellulose-Based Superabsorbent Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以微晶纤维素(MCC)为原料,研究了预处理方式以及同丙烯酸反应过程中反应溶剂对合成高吸水树脂(SAR)吸水率的影响。结果表明,MCC经酸和甲醇环境的预处理后,得到的SAR吸水率都有一定提高;聚合过程中反应溶剂不同,对SAR吸水率有显著影响。所选的5种反应溶剂(即甲醇、乙醇、异丙醇、丙酮和甲醛的水溶液)对SAR吸水率影响规律为:异丙醇和甲醛水溶液对SAR吸水率影响最显著,其次为甲醇和乙醇的水溶液,再次为丙酮的水溶液。经酸预处理的MCC,在甲醛水溶液中通过丙烯酸聚合得到的SAR吸水率可达992g/g。

    Abstract:

    The cellulose-based super absorbent resin (SAR) was prepared by grafting sodium acrylate onto the pretreated microcrystalline cellulose (MCC) with five kinds of solvents, which consisted of 10%(volumn ratio) methanol (ethanol, isopropyl alcohol, acetone or formaldehyde). The results show that both the pretreatment of MCC with dilute acid and suitable organic solvents is beneficial to improve the absorbency of SAR. The SAR samples synthesized with formaldehyde aqueous solution as solvent have the highest absorbency, followed by isopropanol aqueous solution, methanol aqueous solution, ethanol aqueous solution, and acetone aqueous solution. The SAR samples prepared with formaldehyde aqueous solution absorb 992g/g of water.

    参考文献
    相似文献
    引证文献
引用本文

王雷利,曹 青,解小玲.预处理和反应溶剂对纤维素基高吸水树脂吸水率的影响[J].高分子材料科学与工程,2013,29(5):120-124. Leili Wang, Qing Cao, Xiaoling Xie. The Effects of Pretreatment of Cellulose and Different Solvents on the Water Absorbency of the Cellulose-Based Superabsorbent Resin[J]. Polymer Materials Science & Engineering,2013,29(5):120-124.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司