磷氮硅一体化膨胀型阻燃剂阻燃聚丙烯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

新世纪优秀人才支持计划(NCET-10-0562)


Flame Retardant Polypropylene Filled with the Intumescent Flame Retardant Containing the Elements of Phosphorus, Nitrogen and Silicon
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用三氯氧磷、季戊四醇、对苯二胺和氨基硅油成功制备出新型磷氮硅一体化膨胀型阻燃剂(P-N-Si-IFR),通过极限氧指数、锥形燃烧和热失重测试对比研究了常规磷氮膨胀型阻燃剂(P-N-IFR)与P-N-Si-IFR对PP的阻燃效果。结果表明,含有P-N-IFR的PP阻燃体系的极限氧指数、平均热释放速率和残炭率分别为30.7、240kW/m2 和8.7%,含30%的P-N-Si-IFR的PP阻燃体系的3种参数分别为34.0、94kW/m2 和15.2%,表明P-N-Si-IFR对PP阻燃和提高热稳定性的效果优于P-N-IFR对PP阻燃和增强热稳定性的效果。通过X射线衍射分析了含有两种阻燃剂的PP残炭结构,探讨了P-N-Si-IFR的阻燃机理。

    Abstract:

    Phosphorus oxychloride, pentaerythritol, p phenylenediamine and amino terminatedsilicone oil were used to synthesize intumescent flame retardant containing the elements of phosphorus, nitrogen and silicon(P-N-Si-IFR).The inflaming retarding effect of the normal intumescent flame retardant containing the elements of phosphorus and nitrogen (P-N-IFR) and P-N-Si-IFR on PP were studied through limiting oxygen index, cone calorimetry tests and thermogravometric analysis. Limiting oxygen index, average heat release rate and mass residue of PP/P-N-IFR(70/30, mass ratio) are 30.7, 240kW/m2 and 8.7% respectively, and those of PP/P-N-Si-IFR(70/30, mass ratio) are 34.0, 94kW/m2 and 15.2% respectively,which indicate the inflaming retarding effect and thermal stability of P-N-Si-IFR on PP are better than those of P-N-IFR on PP. The char layerstructure was investigated by X-ray diffraction and the flame-retardant mechanism of P-N-Si-IFR on PP was explored.

    参考文献
    相似文献
    引证文献
引用本文

陈少华,刘石磊,杨 林,亢 健,盖景刚,陈金耀,曹 亚.磷氮硅一体化膨胀型阻燃剂阻燃聚丙烯[J].高分子材料科学与工程,2013,29(5):129-132. Shaohua Chen, Shilei Liu, Lin Yang, Jian Kang, Jinggang Gai, Jinyao Chen, Ya Cao. Flame Retardant Polypropylene Filled with the Intumescent Flame Retardant Containing the Elements of Phosphorus, Nitrogen and Silicon[J]. Polymer Materials Science & Engineering,2013,29(5):129-132.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司