微注塑成型工艺对聚丙烯制品形态结构的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

973计划前期研究专项(2012CB626809);2010年河南省重大公益项目(HNZB[2010]N91)


Influences of Process Parameters on the Morphology of Polypropylene Parts in Micro-Injection Molding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中基于一组薄壁微制品的微注塑成型实验,研究熔体温度和注射速度对厚度为1.0mm 和500μm 微制品形态结构的影响。实验结果表明,这两种微制品都呈现出一种相似的皮芯结构,但不同于传统注塑制品4层或5层结构,微制品只有冷冻层、剪切层和芯层3层结构。随着注射速度的提高,在厚度方向上剪切层比例增大,当注射速度超过一定值后,呈现无芯层结构;随着熔体温度的提高,500μm 微制品形态变化不大,1.0mm 微制品芯层小幅增厚。

    Abstract:

    The influences of the melt temperature and the injection speed on morphology of the micro injection molded isotactic polypropylene (iPP) parts, in which the thicknesses is 1.0mm and 500μm, were investigated based on the microinjection molding experiments. Polarizing microscope (PLM) observations indicate that morphology along the thickness direction of micro parts exhibits a similar skin-core structure like morphology of the traditional injection parts. There are three structures in the micro parts including skin frozen layer, shear layer and core layer. The proportion of shear layer increases in the thickness direction with the increase of injection speed, and the parts show a free-core structure when the injection speed exceeds a certain value. With the increase of the melt temperature, morphology of the 500μm micro products has little change, but the core layer of 1.0mm micro-products thickens slightly.

    参考文献
    相似文献
    引证文献
引用本文

郑谏齐,王利霞,张勤星,李 倩,申长雨.微注塑成型工艺对聚丙烯制品形态结构的影响[J].高分子材料科学与工程,2013,29(5):133-136. Jianqi Zheng, Lixia Wang, Qinxing Zhang, Qian Li, Changyu Shen. Influences of Process Parameters on the Morphology of Polypropylene Parts in Micro-Injection Molding[J]. Polymer Materials Science & Engineering,2013,29(5):133-136.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司