气体辅助对聚合物异型材多层共挤成型的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163011);高等学校博士学科点专项科研基金资助(20093601110001);赣鄱英才555工程领军人物培养计划项目资助


Effect of the Gas-Assisted Coextruaion on Special-Shaped Multilayer Polymer Processing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在等温理论模型得到实验验证的基础上,运用有限元方法对i形多层共挤口模进行了三维非等温粘弹数值模拟研究,对比分析了传统共挤和气辅共挤成型时口模内的流场和口模外离模膨胀及界面形状的异同。研究结果表明,熔体流率的变化对传统共挤和气辅共挤成型过程中壳层和芯层的离模膨胀现象均有较大影响,但对异型材整体离模膨胀现象影响不明显;气辅共挤不仅能有效减小甚至消除传统共挤过程中的离模膨胀现象,而且具有显著的节能效果;共挤口模出口处剪切速率和二次流动最大值处即为制品变形最严重处。

    Abstract:

    Based on numerical simulation and experimental research of isothermal theoretical model, the i-shaped multilayer coextrusion 3D non-isothermal viscoelastic model was established by the finite element method. The flow fields and die swell were studied in the traditional and gas assisted coextrusion processes. The results show that melt flow rate has great influence on die swell of skin and core melt, but has little influence on the whole die swell of special shaped product. It can reduce or eliminate the die swell phenomenon and save the energy by using gas-assisted coextrusion molding instead of traditional coextrusion molding. The region having the maximum deformation on product is where having the maximum value of shear rate and secondary flow at die exit.

    参考文献
    相似文献
    引证文献
引用本文

邓小珍,柳和生,黄益宾,黄兴元,章 凯.气体辅助对聚合物异型材多层共挤成型的影响[J].高分子材料科学与工程,2013,29(5):137-140. Xiaozheng Deng, Hesheng Liu, Yibin Huang, Xingyuan Huang, Kai Zhang. Effect of the Gas-Assisted Coextruaion on Special-Shaped Multilayer Polymer Processing[J]. Polymer Materials Science & Engineering,2013,29(5):137-140.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司