聚碳酸丁二醇酯多孔膜的制备及亲水改性
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation of Poly(Butylene Carbonate) Porous Membrane and Its Hydrophilic Modification
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过热致相分离法结合双扩散法制备了聚碳酸丁二醇酯(PBC)多孔膜,并将之与聚己内酯(PCL)多孔膜进行力学性能和接触角的比较。发现PBC的接触角小于PCL多孔膜的接触角,但其力学性能不及后者。通过不同分子量的聚乙二醇(PEO)对PBC多孔膜进行改性,其亲水性进一步提高,发现分子量为2.0×105 的PEO 改性的多孔膜亲水性提高较大,该组膜材料降解速率与亲水性具有正相关性。

    Abstract:

    Poly(butylene carbonate) (PBC) porous membrane was prepared by thermally induced phase separation (TIPS) combined with double diffusion process. PBC porous membrane was compared with polycaprolactone(PCL) porous membrane. It is found that PBC porous membrane has a better hydrophily performance but weaker mechanical properties. Then two kinds of polyoxyethylene(PEO) were added to improve the hydrophility of PBC porous membrane. PEO with molecular weight of 2.0×105 gave a better hydrophility, and the membrane modified by this kind of PEO also had a faster degradation speed.

    参考文献
    相似文献
    引证文献
引用本文

邵成华,沈新元,杨 庆.聚碳酸丁二醇酯多孔膜的制备及亲水改性[J].高分子材料科学与工程,2013,29(5):165-168. Chenghua Shao, Xinyuan Shen, Qing Yang. Preparation of Poly(Butylene Carbonate) Porous Membrane and Its Hydrophilic Modification[J]. Polymer Materials Science & Engineering,2013,29(5):165-168.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司