含酰胺的邻苯二甲腈模型化合物的合成与性能表征
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金面上项目(51173114)


Synthesis and Characterization of Amide-Containing Phthalonitrile Model Compound
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以2,2-二(3-氨基-4-羟基苯基)丙烷为原料,通过亲核和缩合反应成功合成了一种含酰胺的邻苯二甲腈模型化合物(ACNPA),并用氢谱(1H-NMR)和红外光谱(FT-IR)表征了其结构;流变测试发现,该模型化合物在未加固化剂的条件下,在240℃、260℃、280℃均可交联固化,而且随着固化温度的提高,固化所需的时间变短;热重分析(TGA)的测试数据表明,与未固化模型化合物的残炭率41.46%相比,240℃、260℃、280℃固化后产物的残炭率分别提高到了54.21%、61.33%和60.66%。

    Abstract:

    Amide-containing phthalonitrile model compounds(ACNPA)were successfully synthesized from 2,2-bis(3-amino-4-hydroxyphenyl)propane via nuceophilic displacement and condensation reaction. The structure of ACNPA was confirmed by nuclear magnetic resonance (1H-NMR) and Fourier transform infrared spectra (FT-IR). Rheology analysis performed on ACNPA reveals that the model compound can be cured at 240 ℃, 260 ℃, 280 ℃ without curing additive. With the curing temperature increasing, the shorter the required curing time becomes. Thermogravimetric analysis (TGA) was used to study the thermal properties of uncured and cured compound. The results show that compared with the char yield (41.46%, at 800 ℃) of the uncured model compound, the char yield of cured products at 240 ℃, 260 ℃, 280 ℃ is 54.21%, 61.33% and 60.66%, respectively.

    参考文献
    相似文献
    引证文献
引用本文

向首容,曾 科,邹 云,袁 萍,李文栋,杨 刚.含酰胺的邻苯二甲腈模型化合物的合成与性能表征[J].高分子材料科学与工程,2013,29(6):10-13. Shourong Xiang, Ke Zeng, Yun Zou, Ping Yuan, Wendong Li, Gang Yang. Synthesis and Characterization of Amide-Containing Phthalonitrile Model Compound[J]. Polymer Materials Science & Engineering,2013,29(6):10-13.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司