钕系催化剂合成高顺式窄分布聚丁二烯
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(20974016)


Synthesis of Polybutadiene with Highcis-1,4 Content and Narrow Molecular Weight Distribution by Nd-Based Catalyst
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以新癸酸钕(简称Nd)/氢化二异丁基铝(简称Al)/氯化二乙基铝(简称Cl)为催化剂进行了丁二烯(简称Bd)聚合。考察了催化剂配制时不同Bd用量、[Al]/[Nd]、[Cl]/[Nd]、聚合温度和时间对Bd聚合的影响。结果表明:催化剂配制时,随Bd用量的增加,催化活性升高,相对分子质量分布变窄。聚合物产率在[Al]/[Nd]比值很低([Al]/[Nd]=10)时即可达到100%。所得聚合物具有高相对分子质量(?Mn=44×104),窄的相对分子质量分布(1.47),高cis-1,4结构含量(98.3%)。聚合物的微观结构基本不受反应条件的影响,显示该催化剂具有高的稳定性和立体定向性。

    Abstract:

    The polymerization of butadiene was catalyzed by Nd(vers)3/AlH(i-Bu)2/AlEt2Cl. The effects of [Bd]/[Nd] ratio in catalyst preparation, [Al]/[Nd] and [Cl]/[Nd] ratios, and polymerization temperature and time on butadiene polymerization were investigated. The increment of butadiene addition amount in catalyst preparation resulted in the higher catalytic activity and narrower molecular weight distribution of the copolymer. The polymer yield reaches 100% even at low [Al]/[Nd] ration of 10. The polymer has high molecular weight (Mn=44×104), molecular weight distribution (Mw/Mn=1.47), and high cis-1,4 stereoregularity of 98.3%, respectively. Regardless of reaction conditions, the microstructure of the polymer hardly changes, indicating the high stability and stereospecificity of the catalyst.

    参考文献
    相似文献
    引证文献
引用本文

刘贤光,张春庆,胡雁鸣,张学全.钕系催化剂合成高顺式窄分布聚丁二烯[J].高分子材料科学与工程,2013,29(6):28-31. Xianguang Liu, Chunqing Zhang, Yanming Hu, Xuequan Zhang. Synthesis of Polybutadiene with Highcis-1,4 Content and Narrow Molecular Weight Distribution by Nd-Based Catalyst[J]. Polymer Materials Science & Engineering,2013,29(6):28-31.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司