静电纺聚醋酸乙烯酯/TiO2 复合纳米纤维的弯曲力学性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家高技术研究发展计划(863计划)项目(2012AA03A201);天津市高等学校科技发展基金计划项目(20110309)


Bending Properties of Electrospun Polyvinyl Acetate/TiO2 Composite Nanofiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    结合溶胶凝胶法和静电纺丝技术制备了聚醋酸乙烯酯(PVAc)/二氧化钛(TiO2)复合纳米纤维。使用扫描电子显微镜(SEM)、透射电子显微镜(TEM)和扫描探针显微镜(SPM)对复合纳米纤维的表面形貌、内部粒子分布和单纤维弯曲弹性模量进行了表征与测试。结果表明,TiO2纳米粒子均匀地分布在PVAc纳米纤维中;随着TiO2含量的增加,纳米纤维的平均直径从585nm 减少到287nm;由于TiO2溶胶分子与聚合物分子形成了较强的氢键作用使得与杂化纳米纤维的弯曲弹性模量显著增强。

    Abstract:

    Polyvinyl acetate (PVAc)/titanium dioxide(TiO2) composite nanofibers were fabricated by combining sol-gel process with electrospinning technology. The diameter distribution, surface morphology and elastic modulus of nanofibers were characterized and analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and scanning probe microscope (SPM) equipped with picoforce. The results show that TiO2 is evenly distributed on the surface of nanofibers, the average diameter of composite nanofibers decreases from 585nm to 287nm with increase of TiO2 content. The bending elastic modulus of PVAc/TiO2 nanofiber markedly increases due to the hydrogen bond formed between the TiO2 sol molecules and polymer molecules.

    参考文献
    相似文献
    引证文献
引用本文

马 明,梁运兴,吴 宁,张国利,陈 利.静电纺聚醋酸乙烯酯/TiO2 复合纳米纤维的弯曲力学性能[J].高分子材料科学与工程,2013,29(6):46-49. Ming Ma, Yunxing Liang, Ning Wu, Guoli Zhang, Li Chen. Bending Properties of Electrospun Polyvinyl Acetate/TiO2 Composite Nanofiber[J]. Polymer Materials Science & Engineering,2013,29(6):46-49.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司