可交联超支化聚醚醚酮的热性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Thermal Properties of Crosslinkable Hyperbranched Poly(EtherEtherKetone)S
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过差示扫描量热(DSC)和热重分析(TGA)研究了所合成的氟封端的超支化聚醚醚酮(HPDEEK-F)和苯乙炔封端的聚醚醚酮(HPDEEK-PEP)的热性能。结果表明,HPDEEK-F中甲基在氧气条件下可以交联,但交联程度低,HPDEEK-PEP主要是炔基的交联,自交联程度高,甲基交联被包埋,交联后Tg 提高了115 ℃,与线型聚合物交联后的Tg相比提高得更多。HPDEEK-PEP经310℃热处理1h后,5%、10%热失重温度分别由热处理前的437 ℃、480 ℃变为473℃和503℃,热稳定性增强,同时交联后耐溶剂性增强。

    Abstract:

    The thermal properties of fluorin terminated hyperbranched poly(ether ether ketone) (HPDEEK-F) and phenylethynyl terminated hyperbranched poly(ether ether ketone)(HPDEEK-PEP) were studied by DSC and TGA.The methyl of HPDEEK-F could be crosslinked, but crosslinking degree was low. HPDEEK-PEP could self crosslink. The crosslinking methyl was embedded. The self-crosslinking behavior was studied by DSC. After crosslinking, Tg increases by 115 ℃. After HPDEEK-PEP was cured at 310 ℃ for 1 hour, 5%, 10% mass loss temperatures of it changes from 437 ℃ and 480 ℃ to 473 ℃ and 503 ℃, respectively. The cured polymers show good chemical resistance and solvent resistance. This paper provided the theoretical basis for the development of functional and crosslinkable hyperbranched PEEK.

    参考文献
    相似文献
    引证文献
引用本文

陈 杰,牟建新,姜振华.可交联超支化聚醚醚酮的热性能[J].高分子材料科学与工程,2013,29(6):58-61. Jie Chen, Jianxin Mu, Zhenhua Jiang. Thermal Properties of Crosslinkable Hyperbranched Poly(EtherEtherKetone)S[J]. Polymer Materials Science & Engineering,2013,29(6):58-61.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司