纳米蒙脱土种类及含量对聚乳酸/聚丁二酸丁二醇酯复合发泡材料性能的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江苏省工业支撑项目(SBE201201068);江苏省产业化推进项目(JHB2012-2)


Effect of Nano-Montmorillonite Variety and Content on Properties of Polylactic Acid/Polybutylene Succinate Foamed Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选用钠基蒙脱土(MMT)和有机改性蒙脱土(OMMT)分别与聚乳酸/聚丁二酸丁二醇酯共混、挤出并发泡制成复合材料。通过X射线衍射(XRD)、断口扫描电镜(SEM)和力学性能测试探索了不同纳米改性剂对复合发泡材料发泡效果及力学性能的影响。结果表明,MMT和OMMT 的加入均能显著改善复合材料的发泡效果,OMMT 的效果要好于MMT。当OMMT的质量分数为3%时,试样的综合性能最佳,压缩、弯曲和冲击强度分别达到了9.2MPa、14.0MPa和31.2kJ/m2,平均泡孔尺寸则由未改性体系的475.6μm 减小到261.4μm,获得了综合力学性能优良,泡孔细密、均匀,表面质量优的复合发泡材料。

    Abstract:

    Na-montmorillonite (MMT) and organic montmorillonite (OMMT), which were two different kinds of nano montmorillonite, were employed to mix with polylactic acid/ polybutylene succinate (PLA/PBS) resin. The foamed composites were got through extruding and foaming. The effects of different nano modified agents on properties of foamed composites were analyzed through XRD, SEM and mechanical properties test. The results indicate that adding MMT and OMMT can improve the effect of foaming markedly, and OMMT is better than MMT. The best formulation, which is proved through the integrated analysis, is adding 3% OMMT. The compressive strength, flexural strength, impact strength respectively are improved up to 9.2MPa, 14.0MPa and 312 kJ/m2, respectively, and the average size of cells changes from 475.6μm to 261.4μm. Finally, a kind of foamed composites was achieved which has the excellent mechanical properties and uniform cells.

    参考文献
    相似文献
    引证文献
引用本文

周 畅,姚正军,周金堂,姚 芮.纳米蒙脱土种类及含量对聚乳酸/聚丁二酸丁二醇酯复合发泡材料性能的影响[J].高分子材料科学与工程,2013,29(6):74-78. Chang Zhou, Zhengjun Yao, Jintang Zhou, Rui Yao. Effect of Nano-Montmorillonite Variety and Content on Properties of Polylactic Acid/Polybutylene Succinate Foamed Composites[J]. Polymer Materials Science & Engineering,2013,29(6):74-78.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司