Abstract:The blend compatibilities of polyvinyl alcohol (PVA), polyethylene glycol (PEG), polyvinyl pyrrolidone (PVP) and polymethyl methacrylate (PMMA) with polyvinylidene fluoride (PVDF)/dimethylacetamide (DMAc) systems were studied according to blend enthalpy, absolute viscosity and gel point. The influences of additives on membranes forming process, membrane structure and performance were analyzed using gel phase inversion kinetics, AFM, SEM, water contact angle and bubble point pressure measurements etc with deionized water as the gel bath. The results show that blend compatibility order of additives and PVDF/DMAc is as follow, PEG>PVP>PVA>PMMA. Liquid-liquid demixing is dominant in blend systems, in which PEG, PVP with PVDF blend systems are mainly instantaneous demixing, membranes have internal macropores, the cortex and support layer are dense. While PMMA, PVA with PVDF systems represent delay and liquid-solid phase separating behavior, membrane surface is porous, macropores exists internal and sub-layer is loose. Blending optimizes the structure of PVDF ultrafiltration membranes. PVA can effectively enhance membrane hydrophilicity.