不同脱墨方式对纤维形态及超分子结构的影响
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(31170551,31200458);国家教育部博士点基金资助(20110172110015);广东高校优秀青年创新人才培养计划项目(LYM10014);广东省科技计划项目(2010B010900026)


Effects of Different Deinking Methods on Fiber Morphology and Supramolecular Structure of Cellulose
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    对桉木浆进行了碱性脱墨、中性脱墨和酶法脱墨,采用扫描电镜(SEM)、X射线衍射(XRD)及红外光谱(FT-IR)等表征手段研究了不同脱墨方式对纤维形态及超分子结构的作用,并讨论了纤维微观结构的变化与纤维润胀性能的关系。结果表明,脱墨方式对纤维形态及超分子结构都有明显的影响,其中碱性脱墨对纤维形态及超分子结构的作用最为明显,中性脱墨次之,酶法脱墨最小。同时,经脱墨处理后,桉木浆纤维保水值总体呈上升趋势,其中碱性脱墨后保水值增加最大。

    Abstract:

    Three kinds of deinking processes, alkaline deinking process, neutral deinking process and enzymatic deinking process, were used for eucalyptus pulp deinking. The fiber morphology and cellulose supramolecular structure were studied by SEM, XRD and FT-IR. The effects of cellulose supramolecular structure on swelling ability were also studied. The results show that the effects of different deinking process on fiber morphology and cellulose supramolecular structure are obvious. Influence of alkaline deinking on fiber morphology and cellulose supramolecular structure is the most significant than others. After deinking processes, the water retention value (WRV) increases, in an order of alkali deinking>neutral deinking>enzymatic deinking.

    参考文献
    相似文献
    引证文献
引用本文

孟庆林,万金泉,马邕文,王 艳.不同脱墨方式对纤维形态及超分子结构的影响[J].高分子材料科学与工程,2013,29(6):96-100. Qinglin Meng, Jinquan Wan, Yongwen Ma, Yan Wang. Effects of Different Deinking Methods on Fiber Morphology and Supramolecular Structure of Cellulose[J]. Polymer Materials Science & Engineering,2013,29(6):96-100.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司