红外热成像技术研究聚酯纤维的冷拉现象
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Cold-Drawing Phenomena of Polyester Fiber Studied by Infrared Thermography
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用红外热成像技术研究了聚酯(PET)纤维的冷拉颈缩现象,选用一种特殊的18μm 微焦镜头,形变过程中纤维的温度和直径变化能被同时检测到。红外热像图显示冷拉生热温度变化仅发生在纤维成颈区域,而且随着拉伸速率的提高,成颈区域温度升高可超过环境温度50℃~85℃。通过热力学的方法分析形变过程内能的变化,结果发现,内能随着拉伸不断减小,显示PET纤维在形变过程引发诱导结晶。

    Abstract:

    Infrared thermography was used to investigate the necking phenomena in cold-drawing process of PET fiber. The change of temperature and diameter during the necking process was determined accurately online by an infrared camera with 18 μm close-up lens. The infrared thermal images show that self heating of the fiber only occurs in the necking region. Depending on the drawing rate, the temperature of the necking region is found to exceed the ambient temperature by 50 ℃~85 ℃. Internal energy change can be calculated by thermodynamic method. The results show the internal energy decreases monotonically with time, which is caused by induced crystallization of PET fiber.

    参考文献
    相似文献
    引证文献
引用本文

王 孟,陈大俊.红外热成像技术研究聚酯纤维的冷拉现象[J].高分子材料科学与工程,2013,29(6):121-123. Meng Wang, Dajun Chen. Cold-Drawing Phenomena of Polyester Fiber Studied by Infrared Thermography[J]. Polymer Materials Science & Engineering,2013,29(6):121-123.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司