超支化聚(胺)酯基二茂铁/E-51环氧树脂复合材料的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Property of HAPE-Fc/E-51 Epoxy Composite Material
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为制备结构/吸波一体化的复合材料,将超支化聚(胺)酯基二茂铁(HAPE-Fc)作为吸波剂通过物理共混与经超支化环氧(EHBP)改性的E-51环氧树脂基体复合,研究复合材料的密度、热稳定性和力学性能。结果表明,复合材料的密度较小,介于1.15g/cm3~1.23g/cm3 之间;热稳定性较好,起始热分解温度均高于250 ℃,最大热分解温度均高于290℃;力学性能最好的为第二代超支化聚(胺)酯基二茂铁(G2-HAPE-Fc)添加量为5% 的复合材料,拉伸强度为59.05MPa,断裂伸长率为5.77%,冲击强度为12.89kJ/m2。

    Abstract:

    In order to prepare structure/absorbing compound, the ferrocene modified hyperbranched polyaminoeste (HAPE-Fc) was compounded with epoxidized hyperbranched polyesters (EHBP) modified E 51 epoxy by physical blending. The density thermal stability and mechanical properties of composite material were studied. The results show that the density of the composite is low between 1.15 g/cm3~1.23 g/cm3; thermal stability is good, initial decomposition temperatures are higher than 250 ℃, and the maximum thermal decomposition temperatures are higher than 290 ℃. The composite which use the second generation of ferrocene modified hyperbranched polyaminoeste(G2-HPAE-Fc) (5%) shows the best mechanical properties, the tensile strength of 59.05 MPa, the elongation at break of 5.77%, and the impact strength of 12.89 kJ/m2.

    参考文献
    相似文献
    引证文献
引用本文

柴春鹏,王小辰,张 雅,李国平,罗运军.超支化聚(胺)酯基二茂铁/E-51环氧树脂复合材料的制备及性能[J].高分子材料科学与工程,2013,29(6):124-128. Chunpeng Chai, Xiaochen Wang, Ya Zhang, Guoping Li, Yunjun Luo. Preparation and Property of HAPE-Fc/E-51 Epoxy Composite Material[J]. Polymer Materials Science & Engineering,2013,29(6):124-128.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司