诺氟沙星-Zn2+ 金属分子印迹膜色谱的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

天津市自然科学基金重点项目(13JCQNJC02600)


Reparation and Properties of the Norfloxacin-Zinc(Ⅱ) Molecularly Imprinted Membrane Chromatography
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    将膜色谱技术和分子印迹技术相结合,制备了诺氟沙星-Zn2+ 金属分子印迹膜色谱。采用扫描电镜分别观察了聚合物和膜色谱的结构,并考察了不同印迹聚合物填充量对膜色谱的纯水通量和对目标分子的吸附识别能力的影响。结果表明,阶段性升温沉淀聚合制备的印迹聚合物微球粒径均一,适合做膜填充吸附剂。随着填充量的增加可以明显观察到膜内的填充物增加,膜色谱的结构变致密。当填充量为45%(质量分数,下同)、聚偏氟乙烯(PVDF)16%、聚乙二醇(PEG)-40015%、聚乙烯吡咯烷酮(PVP)3%;铸膜液温度为50℃,凝固浴温度为20℃ 时制备得到的诺氟沙星-Zn2+ 金属分子印迹膜色谱的吸附容量为72mg/g。

    Abstract:

    Combining the advantages of membrane chromatography technology and molecular imprinting technique, the norfloxacin-Zn2+ metal molecularly imprinted membrane chromatography was successfully prepared. The structure of the molecular imprinted polymer and membrane chromatography were observed by scanning electron microscopy. The effects of the polymer amount on the performance of the membrane chromatography were studied by water flux test. The membrane chromatography morphology densification was increased with the addition of the filling polymer. Static binding assay results indicate that with the preparation temperature of 50 ℃ and coagulation bath temperature of 20 ℃, the filling polymer 45%, PVDF 16%, PEG 400 15%, polyvinyl pyrrolidone(PVP) 3%, the prepared molecularly imprinted membrane chromatography displays the high capacity of the target molecule and recognition ability. Maximum adsorption capacity is 72 mg/g.

    参考文献
    相似文献
    引证文献
引用本文

皇甫风云,王 兵,孙 妍.诺氟沙星-Zn2+ 金属分子印迹膜色谱的制备及性能[J].高分子材料科学与工程,2013,29(6):129-132. Fengyun Huangfu, Bing Wang, Yan Sun. Reparation and Properties of the Norfloxacin-Zinc(Ⅱ) Molecularly Imprinted Membrane Chromatography[J]. Polymer Materials Science & Engineering,2013,29(6):129-132.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司