聚酯液晶/环氧树脂复合材料的合成及应用
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51163004);广西自然科学基金资助项目(0991003Z)


Preparation and Properties of Liquid Crystalline Polyester/Epoxy Resin Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以4,4′-二(β-羟乙氧基)联苯(BP2)、对苯二甲酰氯(TPC)为原料,吡啶为催化剂,通过溶液聚合法合成一种含有联苯基的新型聚酯液晶(DCLP)。采用红外光谱(FT-IR)、偏光显微镜(POM)及X射线衍射(WAXD)对DCLP的分子结构和液晶性进行表征,然后将该聚酯液晶与环氧树脂(E-44)共混制备聚酯液晶/环氧树脂复合材料,并对其性能进行研究。实验结果表明,加入3%的DCLP,可使复合材料的冲击强度由26.2kJ/m2 提高到47.7kJ/m2,拉伸强度和弯曲强度也有不同程度的提高,热分解温度提高10℃~20℃。冲击断面的扫描电镜(SEM)分析表明,聚酯液晶对环氧树脂固化物有明显的增韧效果。

    Abstract:

    Using pyridine as catalyst ,a new kind of liquid crystalline polyester (DCLP) containing diphenylnate was synthesized by solution polymerization of 4,4′-bis-(2-hydroxyhexoxy)biphenyl (BP2) and paraphthaloyl chloride, then characterized by means of FT-IR,POM and WAXD. The observation of POM shows that the liquid crystalline polyester is a thermotropic nematic liquid crystalline polymer. The properties of DCLP were characterized. DCLP was used to modify the conventional epoxy resin (E-44). Experimental results reveal that the impact strength of the epoxy resin modified with DCLP increases from 26.2 kJ/m2 to 47.7 kJ/m2, and the tensile strength as well as the bending strength is also improved. The thermal decomposition temperature of modified systems is also 10 ℃~20 ℃ higher than that of the unmodified system. The SEM micrographs of impact fracture show that cured product of epoxy has a significant toughening effect.

    参考文献
    相似文献
    引证文献
引用本文

刘 括,陆绍荣,罗崇禧,李善荣,郭 栋.聚酯液晶/环氧树脂复合材料的合成及应用[J].高分子材料科学与工程,2013,29(7):9-12. Kuo Liu, Shaorong Lu, Chongxi Luo, Shanrong Li, Dong Guo. Preparation and Properties of Liquid Crystalline Polyester/Epoxy Resin Composites[J]. Polymer Materials Science & Engineering,2013,29(7):9-12.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2013-10-08
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司